基本释义:

有限元模拟

网络释义

1)Finite element simulation,有限元模拟

2)FEM simulation,有限元模拟

3)FE simulation,有限元模拟

4)FEM,有限元模拟

5)finite element modeling,有限元模拟

6)finite element modelling,有限元模拟

用法和例句

Finite Element Simulation of the Gas Flow Field in the Dry Gas Seal Spiral Grooves;

干气密封螺旋槽内气体流场的有限元模拟

Three dimensional finite element simulation of rolling force during continuous hot strip rolling process;

带钢热连轧过程轧制力三维有限元模拟

Study of finite element simulation of bistable expandable screen pipe;

双稳态膨胀筛管有限元模拟研究

FEM simulation of forging process for the design of a rear axle bracket;

有限元模拟在后轴支架锻造设计中的应用

3D coupled thermo-mechanical FEM simulation of forging process of TC4 alloy workpiece;

TC4钛合金锻件锻造过程三维热力耦合有限元模拟

Thermal simulating experiment and FEM simulation of dynamic recrystallization of 09CuPTiRE steel;

09CuPTiRE钢动态再结晶的热模拟实验与有限元模拟

Design and optimization of drawbead of automotive panels by FE simulation;

汽车覆盖件成形拉深筋的有限元模拟与优化

Study on FE Simulation of Chip Formation and Temperature Field during High Speed Machining Hardened Steel;

高速切削淬硬钢切屑形成过程及温度场有限元模拟研究

In the FE simulation of contact and friction processes in sheet metal forming,in order to get reliable calculation results,the dynamic contact of the sheet metal with the die needs to be simulated accurately.

对板料成形过程进行有限元模拟时,为了取得可靠的计算结果,需要准确地描述模具与板料之间的动态接触状态。

FEM OF COLOR-COATED SHEET DEFORMATION PROCESS;

彩涂板压型过程的有限元模拟

FEM of stress field of mould in high speed continuous casting of steel billet;

小方坯高速连铸时结晶器应力场有限元模拟

FEM adopted to determine the reasonable overburden thickness for a subaqueous tunnel;

水下隧道合理覆盖层厚度的有限元模拟研究

Multi-level finite element modeling of long-span bridges for structural damage diagnosis and safety evaluation;

大跨桥梁结构损伤诊断与安全评估的多尺度有限元模拟研究

First, three-dimensional finite element modeling was used to simulate the temperature distribution of camshaft during filling and solidification.

通过实测数据与模拟数据的比较,确定有限元模拟的最大相对误差为4。

The finite element modeling method is used to stimulate the course at which a reinforced concrete beam isn t loaded until it has fissures and the principle of residual life evaluation on the basis of elements of damaged beam is introduced.

探讨了对钢筋混凝土梁自加载到开裂整个过程进行有限元模拟的方法,介绍了基于损伤梁单元的剩余寿命评估的原理,结合工程实例,基于ANSYS计算钢筋混凝土梁开裂后的损伤度以及剩余寿命,为既有桥梁寿命评估提供参考。

The verification of finite element modelling with tested data demostrates that the self-supporting technique can greatly reduce the support piles in diameter and length, save cost and shorten the construction period when the the safety of the adjacent existing buildings is ensured.

针对紧临既有建筑物多层地下结构施工,利用地下结构本体为支护桩提供支点,通过有限元模拟分析与实测数据相互验证,证明该技术能在确保既有建筑结构安全的前提下,大大缩小支护桩桩径和桩长,节约成本、缩短工期。

Finite Element Simulation of Die Forging Process for 7075 Al-alloy

7075铝合金模锻成形过程有限元模拟

Finite element simulation of fatigue crack growth of MSD with multiple collinear holes on finite plate

有限板共线多孔MSD疲劳裂纹扩展有限元模拟

Three dimensional FE simulation of ball spinning of inner grooved copper tubes

内螺纹铜管滚珠旋压三维有限元模拟

Elastic-Plastic FEM Simulation on Thin Strip Cold Rolling Process;

薄带钢冷轧过程的弹塑性有限元模拟

Finite Element Simulation of CP-Ti during Equal Channel Angular Processing at Room Temperature;

工业纯钛室温ECAP变形有限元模拟研究

Optimized Pass Design System of Angle Steel and Finite Element Simulation;

角钢孔型优化设计系统及有限元模拟

Finite Element Simulation and Application of Equal Channel Angular Extrusion;

等通道转角挤压的有限元模拟及应用

Finite Element Simulation for Laser Curve Forming of Sheet Metals;

板料激光曲线弯曲成形的有限元模拟

Finite Element Simulation of Sheet Metal Deep Drawing Process;

金属板材深冲成形过程的有限元模拟

FE Simulating and Technics for Forming of Large Thick Cylinder;

大型厚壁筒体成形工艺及有限元模拟

Finite Element Simulation of Process for Automobile Steering Knuckle;

汽车转向节成形工艺有限元模拟研究

Study of Impulse Magnetizing NdFeB Permanent Ring Magnets by Finite Element Analysis;

有限元模拟NdFeB永磁环脉冲充磁的研究

The FEM Simulation of Bending Part using High Pressure Rubber Forming;

高压橡皮成形弯边零件的有限元模拟

The Finite Element Simulation of F.C.C Poly-Crystalline Plastic Deformation;

面心立方多晶体塑性变形有限元模拟

The Research of Finite Element Simulation of Tubular Product s Forming;

管形件塑性成形过程有限元模拟研究

Flatness Finite Element Simulation Analysis for the Five-stand Cold Tandem Rolling Mill;

五机架冷连轧机板形有限元模拟分析

FEM Seepage Analysis of Concrete Faced Rockfill Dam under the Cases of Vertical Joint Inactivation;

面板坝垂直缝失效渗流场有限元模拟

Numerical simulation of ultrasonic fields in cavitating liquid based on finite element method and finite difference method

基于有限元及有限差分法的超声空化场模拟