基本释义:

原垫圈

网络释义

1)original washer,原垫圈

2)Gasket,垫圈

3)washer,垫圈

4)spacer

['speis?],垫圈

5)shim washer,垫上垫圈

6)gasket,衬垫，垫圈

用法和例句

The preparation methods of deketoxime type one-part RTV silicone rubber sealant on spreadability and for formed inplace gasket were introduced respectively.

介绍了可涂饰性及就地成形密封垫圈用脱酮肟型单组分RTV硅橡胶密封剂的配制方法。

As an example of standard parts,this article introduces how to exploit a program that can draw gaskets of different types and different dimensions quickly by using DCL & AutoLISP language in AutoCAD.

以标准件垫圈为例,介绍了如何在AutoCAD软件中利用DCL和AutoLISP语言开发一个能快速绘制不同类型、不同尺寸的垫圈的应用程序。

With the washer for the fixing base as an example,the structure of a kind of mulˉti-position progressive die which can transfer the semi-finished parts from one position to the next position.

以固定座零件垫圈为例,介绍了一种可实现工位与工位之间工序件传递的多工位级进模的结构,并介绍了该模具的设计要点。

It is concluded that the crack is initiated by the inner diameter of the copper sealing washer not matching with the outside wall dimensions.

对缸套凸肩处的受力进行分析和强度验算,确证因缸套紫铜垫圈内径与缸套外壁配合尺寸不合理引起凸肩处产生裂纹,通过改进缸套紫铜垫圈,可解决产生裂纹的问题。

Aim The spacer of engines is redesigned as a force transducer while acting as a spacer too on purpose of the test of engines.

目的　针对发动机试验的需求 ,在保持原垫圈特性的同时 ,将垫圈设计成为一个力传感器 。

horse shoe washer

开口垫圈,马蹄形垫圈

Washers with ball face

GB/T849-1988球面垫圈

Washers with split

GB/T851-1988开口垫圈

Plain washers--Small series--Product grade A

GB/T848-1985小垫圈--a级

Plain washers--Normal series--Product grade A

GB/T97.1-1985平垫圈-a级

Washers with cone face

GB/T850-1988锥面垫圈

Specifications for spring washers--Single coil spring lock washers

GB/T94.1-1987弹性垫圈技术条件弹簧垫圈

A wide range of standard stampings, non-standard products, stainless steel washers, internal/ external teeth washers, rings, circlips for holes, circlips for shaft, other fasteners, fittings, seal washers and clamps主要生产各种标准件冲压件.各种非标产品.

不绣钢垫圈;内外齿垫圈;挡圈;孔用挡圈;轴用挡圈;纱嘴头,其他紧固件、接件密封垫圈卡圈.

Inner sphere washers

GB/T1030-1988内球面垫圈

Plain washers--Large series--Product grades A and C

GB/T96-1985大垫圈-A和c级

Plain washers--Product grade C

GB/T95-1985平垫圈-c级

Plain washers--Extra large series--Product grade C

GB/T5287-1985特大垫圈c级

Square taper washers for slot section

GB/T853-1988槽钢用方斜垫圈

Plain washer for assembly

GB/T9074.24-1988组合件用平垫圈

Big plain washer for assembly

GB/T9074.25-1988组合件用大垫圈

Single coil spring lock washers--Normal type

GB/T93-1987标准型弹簧垫圈

Lock washers external teeth

GB/T862.1-1987外齿锁紧垫圈

Curved spring washers

GB/T860-1987鞍形弹性垫圈