基本释义:

圆柱面

网络释义

1)Cylindrical surface,圆柱面

2)cylinder surface,圆柱面

3)cylinder,圆柱面

4)Cylinders,圆柱面

5)cylindricity,柱面性，圆柱

6)Internal Cylinder,内圆柱面

用法和例句

Electric Field Intensity of a Uniformly Charged Cylindrical Surface With Limited Length;

有限长均匀带电薄圆柱面面上的场强

Magnetic Induction of a Thin Cylindrical Surface of Limited Length Uniformly Loaded With Current;

有限长均匀载流薄圆柱面面上的磁感应强度

Magnetic Induction Intensity of Electric Current on the Finite-Length-Even Cylindrical Surface

有限长均匀圆柱面电流所在处的磁感应强度

Partially-threaded multi-layered biaxial weft knitted fabric on a cylinder surface

纬编双轴向抽纱织物的圆柱面成型

When cylinder surface and cone surface penetrate each other,if their axises intersect slantly and are parallel to the frontal projecting plane,there will he special points in the penetrating line.

本文对轴线斜交，且两轴线平行于某一投影面的圆柱面与圆锥面相贯时，相贯线上的特殊点进行探讨，从而得出了用辅助球面法不能求出该相贯线上的最右点的结论。

As for the point data are affected by noise in point cloud,the initial estimates are usually unstable that often leads to failure or incorrect result in the process of fitting point cloud to cone or cylinder.

由于点云数据中存在噪声的影响,采用基于点云数据的拟合算法对圆柱面和圆锥面拟合时进行,获得的拟合初值不稳定,从而严重影响了最终拟合曲面的准确性。

With the projection restriction relationship of the cylinder and the plane being the criterion, we can finally recognize the cylinder and plane through searching among the data set of.

分别以圆柱面和平面的投影约束关系为准则 ,通过在视图的数据集中搜索各投影特征 ,识别视图中的圆柱面和平面 ,形成物体完整的表面模

Through studying the intersection of paraboloid of revolution and cylinder, the author concluded that the horizontal projection of the intersecting lines—, is the famous Four-order algebra curve-Perseus curve.

通过对回转抛物面与圆柱面相交的研究，得出交线的水平投影曲线——为四次代数曲线——Perseus座曲线的结论。

Blending of Two Cylinders with Axes in Different Plans;

两个轴异圆柱面的拼接(Ⅱ)yh

In this paper,we prove that for two cylinders with axes in different planes,the GC~1 blending surface doesn′t exist between the sections in the clipping planes at some certain cases.

证明了两个轴线异面的圆柱面在与轴线斜交的平行平面截口处若干种情形不存在GC1拼接曲面。

NC Form Milling for Internal Cylinder;

内圆柱面的数控端铣成形法

base cylinder of involute helicoid worm

渐开线蜗杆基圆柱面

Theoretical Calculation and Design for Cylindrical and Conical Bent Crystal Spectrograph

圆柱面和圆锥面弯晶谱仪的理论计算及设计

Electric Field Intensity of a Uniformly Charged Cylindrical Surface With Limited Length;

有限长均匀带电薄圆柱面面上的场强

Research on Non-equalization Machining Method for Cylindrical Cam Manufacturing Cylindrical Surfaces with Ring of Arc Groove

在圆柱面上加工环形圆弧凹槽的新方法研究

Analytical Formulas for Reflected Ray Tracing on Elliptic Cylinder based on the Fermat Principle

UTD应用中椭圆柱面反射点的解析求解

Magnetic Induction of a Thin Cylindrical Surface of Limited Length Uniformly Loaded With Current;

有限长均匀载流薄圆柱面面上的磁感应强度

The equilibrium and stability of an elastic rod with circular cross section under the constraint of a cylinder is discussed.

讨论受圆柱面约束的圆截面弹性杆的平衡与稳定性。

Location measurement of circular rod in glass tube

玻璃圆管中圆形截面杆柱位置的测定

A cylindrical surface or solid all of whose sections perpendicular to the elements are elliptical.

椭圆柱与组成要素垂直的所有圆柱形表面或柱体的部分是椭圆形的柱体

The ortho cone helicoid was used interrsect intercept by the ortho cone helicoid and the cylinder.

正圆锥螺旋面是正圆柱螺旋面被同轴正圆锥面截得。

Discussing based on cutting method of conical cylinder with plane arc axes;

平面大圆弧轴线圆锥柱体切削机理研讨

Slotted large raised cheese head screws

GB/T947-1988开槽球面大圆柱头螺钉

Slotted capstan screws

GB/T832-1988开槽带孔球面圆柱头螺钉

Is that pillar square with the ground?

那根圆柱兴地面成直角吗？

Filling the cylinder with lead shot to simulate a sample's weight.

圆柱里面灌铅，以模拟样本的重量。

Slotted raised cheese head with shoulder

GB/T946-1988开槽球面圆柱头轴位螺钉

Square set screws with long dog point and rounded end

GB/T83-1988方头长圆柱球面端紧定螺钉

a cylindrical tube around which the hair is wound to curl it.

头发缠绕在上面使得卷曲的圆柱管。