基本释义:

增加热量

网络释义

1)increased heat,增加热量

2)heat gain,热量增加

3)humidified and heated air,增湿加热

4)heat gain,热增加

5)increment,增量;增加值

6)Increment of nickel,镍增加量

用法和例句

In this paper, the mechanism of drying technology decreasing paddy stress crack by using humidified and heated air was analysed.

研究了增湿加热的稻谷干燥工艺减少爆腰产生的机理。

There is a increase in heat radiation with a increase in load, and there is a decrease with an increase in speed.

负荷增加时辐射热量增加,转速增加时辐射热量减少。

In an adiabatic system, this heat release serves to increase the chamber temperature.

在一绝热系统中，放出的热量增加了燃烧室的温度。

His appetite became ravenous and his caloric intake doubled, yet he lost10 kg.

他的胃口变得很大，食物热量增加2倍，但体重却减轻了10公斤。

For instance, two cups of coffee will augment blood flow, respiration, and body hear production by 10 to 20 percent.

例如，两杯咖啡就会使我们的血流、呼吸和身体热量增加10%至20%。

But turning up the heat increases the manufacturer's energy bill.

不过增添热量却要增加生产厂的能耗。

Plasticizers--Determination of mass loss on heating

GB/T1669-1988增塑剂加热减量的测定

a theory that the temperature of a body increases when kinetic energy increases.

热能量增加物体的温度即提高的理论。

Heat gain may come from the following sources.

热量的增加可能有下列一些来源。

All the added heat has served to increase the internal energy.

所有加进的热量都用于增加物质的内能。

After thermal fatigue,the content of γ phase increased,and α2 decreased accordingly.

热疲劳后,γ相的含量增加,α2的含量相应地减少。

5. The temperature resistance of jute fiber reinforced polypropylene composite increase with increasing fiber content.

5、黄麻纤维增强复合材料的耐热性随纤维含量增加而递增。

an area of 10 million square meters will be heated in these ways reducing coal use by 0.34 million ton.

城市热力供热替煤： 增加5500万平方米集中供热面积，替煤量47万吨。

Vasodilation: leads to greater blood flow to the area of inflammation, resulting in redness and heat.

血管扩张：炎症灶血流量增加使得局部红、热。

gain [gather] momentum

增加动量,增加劲头,得势

"As thermal expansion conditions develop, pressure builds up to the setting of the relief valve. This will cause discharging of small quantity of water."

随着热量的增加,压力也随着增加,并达到安全阀的压力设置。此时将导致安全阀排泄出少量的水。

The major influencing factors of felting quality are pre-heating temperature and glue depth, and the installation of the temperature raising set in the felting parts.

经分析确定了影响粘接质量的主要因素是加热温度与打胶深度，对粘接部分增加了预加热装置。

The sensible heat factors are found to increase with both Reynolds number and inlet temperature of cold water.

湿盘管的热传量随著入口风速与鳍片数目的增加而增加，显热比及除湿率亦随著风速增加而增大。

heating calorimeter, berthelot

泊日洛特加热量热器