基本释义:

支柱加载方法

网络释义

1)strut charging technique,支柱加载方法

2)strut charging,支柱负[加]载(量)

3)strut charging procedure,支柱加载程序

4)loading method,加载方法

5)H load-bearing pillar,承载支柱

6)pillars load,支柱载荷

用法和例句

Selection of loading methods in SATWE software and analysis of calculation results

SATWE中模拟加载方法的选用及计算结果分析

Compared with other tunnel lining tests,this paper emphasizes a testing loading method and the design of corresponding loading equipments of lining whole wreath in detail.

本文详细介绍了衬砌整环试验的加载方法、相应加载设备的设计,并同以往衬砌试验的加载方法进行对比,为今后相关试验提供重要的参考依据。

Compared with other tunnel lining test, this paper emphasizes a testing loading method and the design of corresponding loading equipments of double-circular face shield-tunnel lining in detail.

本文详细介绍了双圆盾构衬砌试验的加载方法 ,及相应加载设备的设计 ,并同以往盾构衬砌试验的加载方法进行对比 ,为今后类似试验提供参

5m distance between pillar base and wall foot, a woorkshop with H load-bearing pillars was successfully demolished by controlled blastingwith hole pattern arranged in the light of the principle of a blasting method with minor burden and wide hole spacing.

5m的情况下,运用小抵抗线宽孔距爆破法原理进行布孔,安全成功地拆除了一工形承载支柱厂房。

Methods of Boot load research on Multi-core DSP

多核DSP Boot load代码加载方法研究

A FPGA Slave Parallel mode configuration method based on ARM-Linux

一种基于ARM-Linux的FPGA程序加载方法

Could not load type %1 from assembly %2 because the method %3 could not be loaded.

未能从程序集 %2 中加载类型 %1，因为未能加载方法 %3。

STUDY ON PUSHOVER ANALYSIS METHOD BASED ON LATERAL LOADING PATTERN

基于侧向力加载方式的Pushover分析方法

Research on the Method of Measuring Large Diameter Pile Bearing Capacity by Self-Balance System with Loading on Pile Top;

大直径桩承载力桩顶加载自锚式测试方法研究

Bearing capacity of foundations above caves based on incremental load method

基于增量加载法的隧洞上方地基承载力研究

Electro-Hydraulic Actuator Load Simulation Control System;

电动舵机动态加载仿真控制方法研究

Forced Control of Hydraulically Driven System for Hydro-pneumatic Suspension Testing

电液伺服油气悬架加载系统控制方法

Discussion on Experimental Method for Loading of Large-tonnage Construction Hanging Basket

大吨位施工挂篮加载试验方法的探讨

A Method for Loading Flash by JTAG

Flash在线数据加载的JTAG通用方法研究

The fracture sections of metals under loading conditions, cyclicloading, monotonic loading and impact loading have been analyzed by Fourierseries analysis method.

用富里叶分析方法分析了交变加载、单向加载和冲击的断口。

Study on the Experimental Techniques for Cellular Mechanics: the Compressive Loading and Modified Substrate Stretch Systems;

细胞力学实验方法研究：压力加载及改进的膜式张应变加载

Research on Evaluation Method of Loading and Securing Plan of Railway Goods;

铁路货物装载加固方案评估方法的研究

Research on Loading Way and Measurement Methods of Automatic Rockwell Hardness Tester

全自动洛氏硬度计加载方式和测量方法的研究

Study on Checking Method of Bearing Capacity of Arch Bridge Reinforced by Enlarging Section Area

增大截面法加固拱桥承载力验算方法研究

A Study on the Heat-treat Ballast Water Treatment in Oil Tankers

油船采用加热法处理压载水方法的研究

A Study on Numerical Methods for Analyses of Bearing Capacity Behaviour of Offshore Foundation under Combined Loading;

复合加载条件下海洋地基承载力特性数值分析方法研究

The Study on Bearing Capacity Evaluation Method and Strengthening Technology of Concrete Bridge Based on Loading Test;

基于荷载试验的混凝土桥梁承载力评定方法及加固技术研究