基本释义:

轴向载荷系数

网络释义

1)axial load factor,轴向载荷系数

2)axial load,轴向载荷

3)axial load,轴向荷载

4)Axial loads,轴向载荷

5)static thrust load factor,轴向静负荷系数

6)radial load factor,径向载荷系数

用法和例句

Analysis of axial load influence on mechanics characteristic of ocean deep water drilling riser;

轴向载荷对海洋深水钻井隔水管力学特性的影响分析

Stability of pipe conveying fluid under axial load;

轴向载荷输流管道的稳定性分析

We have deducedthe simplified mechanics model for calculating frictional resistance and axial load when lowering pipe string or lifting pipe string in a inclined well.

在斜井中 ,考虑了方位角的变化 ,建立管柱受力平衡方程 ,推导出斜井中下管柱和提管柱时摩擦阻力和轴向载荷的简化力学模型 ,分析计算了下管柱和提管柱时摩擦阻力、轴向载荷以及管柱轴向变形等重要参数的解析公式。

The deformation,axial load,distribution of shaft r.

结果表明,由于夯实水泥土桩体强度的限制,荷载沿桩身的传递限定在浅层一定范围内,桩身变形、轴向荷载、桩侧摩阻力分布主要发生在此范围内,而且变化梯度较大。

In order to study the distribution of stress concentration factor(SCF) along the welded toes of the joint under axial load(AX) and in-plane-bending load(IPB),full-scale completely overlapped K-joint specimen has been tested.

对大型完全叠接K型管节点试件分别承受轴向荷载和平面内弯曲荷载时的应力集中系数进行了实验测试,通过数值分析,得到了完全叠接K型管节点承受这两种基本荷载作用时焊缝周围的应力集中系数分布情况,分析结果与实验数值相吻合,结果表明在轴向荷载和平面内弯曲荷载作用下,斜管与叠管交接处的应力集中现象比较严重,而主管相对安全,这对指导工程设计是非常有益的。

Influence of dynamic axial loads on the vibration characteristics of supercavitation underwater vehicle;

动态轴向载荷对超空泡航行体振动特性的影响

Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation

考虑剪切变形时轴向载荷联合作用下压杆屈曲

The buckling of large vertical cylindrical shells with welds subjected to local thermal action and axial loads was studied with numerical method by using ANSYS code.

对大型直立设备安装过程中的现场焊接热处理过程中在轴向载荷和局部热载荷共同作用下的屈曲问题进行数值研究。

Deep groove ball bearings mainly take radial load as well as take moderate axial load.

深沟球轴承主要承受径向载荷，也可承受一定量的轴向载荷。

Axial load-deformation curve and preload on angular con act ball bearings

角接触球轴承的轴向载荷—变形曲线和预紧

Axial load fatigue testing for threaded fasteners

GB/T13682-1992螺纹紧固件轴向载荷疲劳试验方法

Analysis and Calculation about Axial Load of Rotate Shoulder Connection;

旋转台肩连接螺纹轴向载荷分析与计算

Buckling of compressed bar subjected to combined effect of axial loads considering shear deformation

考虑剪切变形时轴向载荷联合作用下压杆屈曲

Deformation Characteristics of Wires Helix in Single-strand Rope Bearing Axial Load

轴向载荷下单股钢丝绳内部钢丝变形特性

Four pionts angle contact ball bearing is separable bearing,it can be subject to bi-directional load and have the function of both single row and double rows bearings.

四点接触球轴承为可分离型轴承，可承受双向轴向载荷，并有单列和双列角接触球轴承的功能。

Numerical investigation on interaction of axial and lateral response for super-long pile

轴-横向荷载作用下超长桩数值模拟

Finite element analysis of PVC coated biaxial warp knitted fabric under multiaxial loads

多向载荷下PVC双轴向经编织物有限元分析

Finite element simulation of PVC coated biaxial warp knitted fabric under biaxial loads

双向载荷下PVC涂层双轴向经编织物有限元分析

Precracked tearing properties of PVC/ biaxial warp knitted fabric under multiaxial loads

多向载荷下PVC/双轴向经编织物的开缝撕裂性能

Ultimate Strength of Stiffened Plates with a Square Opening Under Axial and Out-of-Plane Loads

轴向荷载与面外荷载作用下带方形开口加肋钢板的极限强度

Tapered roller bearings are generally used to support combined load mainly consisting of radial load.

圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷。

Taper roller bearings are generally used to support combined load mainly consisting of radial load.

详细信息:圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。

ELASTIC DYNAMIC BUCKLING OF THIN CYLINDRICAL SHELLS SUBJECT TO AXIAL STEP LOAD

轴向阶梯载荷下薄圆柱壳的弹性动力屈曲

AN ELASTO-PLASTIC MODEL OF A BAR UNDER CYCLIC AXIAL LOADS

轴向循环载荷下直杆的一个弹塑性计算模型

Research on Axial Loading-Settlement Curve of Super-Long Bored Single Pile;

超长钻孔灌注单桩轴向荷载—沉降曲线研究

Study on stress concentration factors of K-joints under axial loads

轴向荷载作用下K型管节点应力集中系数研究