基本释义:

注射成形法 喷射铸造法

网络释义

1)injection moulding,注射成形法 喷射铸造法

2)injection moulding,注射成形法;喷射铸造法

3)injection moulding,喷射铸造法 注射成形法

4)spray casting,喷射铸造

5)gunning process,spray-up method,喷射成形法

6)injection molding,注射成形

用法和例句

Preparation of CuCr25 alloy by spray casting;

用喷射铸造法制备CuCr25电触头合金

The research and development of spray casting of superalloys in the world are also reviewed.

喷射铸造高温合金具有成分均匀、无宏观偏析、晶粒与组织细小等快速凝固组织特征,同时它的热塑性和力学性能得到改善。

Research on the bonded hybrid magnets of Nd-Fe-N/Nd-Fe-B prepared by injection molding;

注射成形粘结Nd-Fe-N/Nd-Fe-B复合磁体的研究

Bonded NdFeB magnets prepared by injection molding;

注射成形制备NdFeB粘结磁体

Effect of processing parameters on the properties of injection molding anisotropic bonded NdFeB magnet;

工艺参数对注射成形各向异性粘结NdFeB磁体性能的影响

Comparion Study of Metal Injection Molding and Plastic Injection Molding

金属注射成形与塑料注射成形的比较研究

Fabrication of W-Cu Materials by Warm Compaction and Powder Injection Molding

温压成形和注射成形制备钨铜复合材料研究

Sintering behavior of Cu-10Ni alloys shaped respectively by Mold-pressing and metal injection molding techniques

注射成形和模压成形Cu-10Ni合金的烧结行为

Defects and Properties Analysis of Cemented Carbide by PIM;

注射成形硬质合金缺陷与性能的研究

Power Injection Molding of a Kovar Alloy;

Kovar合金的粉末注射成形工艺研究

The Powder Injection Molding of ZrO_2 Samll Parts and the Dimension Precision Control;

ZrO_2小型零件粉末注射成形与精度控制

Injection Molding of Disk Type Ceramics

盘、碟类陶瓷制品的注射成形(Ⅱ)

Optimized design of the drafting board process based on the software of Moldflow

基于Moldflow的绘图板注射成形优化设计

Solid Solution and Aging Treatment of Thixoforming AZ91D Alloy

触变注射成形AZ91D的固溶和时效热处理

Rheological Characteristics Of ZrO_2 Ceramic Injection Molding

ZrO_2陶瓷注射成形的流变特性

Research on Related Techniques of Powder Injection Molding of Ti(C,N) Based Cermets;

Ti（C，N）基金属陶瓷粉末注射成形相关技术研究

Preparation of Skidproof Coelioscope Tissular and Vascular Clamp by Metal Powder Injection Molding;

金属粉末注射成形制备防滑腔镜组织、血管夹

Study on the Thixomolded Process and Heat Treatment of AZ91D Magnesium Alloy;

AZ91D镁合金触变注射成形工艺及热处理研究

Research on Powder Injection Molding of Ti(C, N) Based Cermets;

Ti（C，N）基金属陶瓷粉末注射成形的研究

Study on Powder Injection Molding for 316L Stainless Steel and ZTA Ceramics;

316L不锈钢及ZTA陶瓷粉末注射成形技术的研究

Simulation of Stable of Power-law Flow in PIM;

粉末注射成形中幂律稳态问题的数值计算

On-line Optimization and Detection of Process Parameters for Plastic Injection Molding Machine

塑料注射成形机工艺参数的在线优化与检测

roentgenographic examination of blood vessels after injection of a radiopaque contrast medium; produces an angiogram.

注射造影剂后用放射线检查血管，形成血管影像。