基本释义:

主销轴承座圈

网络释义

1)kingpin bearing race,主销轴承座圈

2)bearing ring,轴承座圈

3)main bearing wall,主轴承座

4)king bolt bearing,主销轴承

5)inner bearing cup,轴承内座圈

6)bearing outer race,轴承外座圈

用法和例句

Analysis for surface quench cracks of big bearing ring;

大型轴承座圈表面淬火裂纹分析

The final mechanical property of bearing ring depends on the deformation, In order to make bearing ring have good quality and obtain high prouction efficieny, this paper analyzes multiple rolling range in the machining,rang of the equipment, considers the equipment capacity and the deformation of ring blank, and then sets a mathematical model of process parameter in rolling.

在设备能力范围内，分析了冷辗扩加工的综合辗压区，综合考虑了辗压时的力能参 数与环坯变形状态，建立了轴承座圈冷辗扩加工工艺参数分析的数学模型。

To validate the FEM calculations of the cylinder block of a six-cylinder in-line diesel engine,the dynamic strain-stress and temperatures of the main bearing walls and caps were measured on engine testbed with strain-gauge and resistance thermometer.

为评估某直列6缸柴油机缸体有限元强度分析结果,采用应变电测法实测了该发动机缸体上可能的危险部位主轴承座、主轴承盖动态应力以及这些部位的温度。

Since the boost pressure of a diesel engine is increased,the FEM analysis of the main bearing wall to evaluate the structural strength was conducted.

对某直列6缸柴油机提高增压压力后主轴承座的结构强度进行了有限元分析。

main bearing aligning gauge

主轴承座孔同轴度检验仪

Measurement of Dynamic Stresses and Temperatures of Main Bearing Walls and Caps on an Engine Block

发动机缸体主轴承座及主轴承盖的动态应力和温度测量

Analysis of Damage Cause and Repair for the Main Bearing Host of M/V IRIS

IRIS轮主机主轴承座损伤原因分析及修理

Laser Cutting Equipment of Fracture Splitting Groove of Engine Crankcase Bearing;

发动机缸体主轴承座裂解槽激光加工设备

Research on Fracture Splitting Processing Technology and Equipment of Engine Crankcase Bearing Block

发动机缸体主轴承座裂解加工技术与装备研究

Research and Design on the Backpressure Device and Bolt Assembly System in the Fracture Splitting Equipment of Main Bearing Walls on an Engine Block;

缸体主轴承座裂解加工背压装置及螺栓装配系统研制

Research and Design on Automatic Assembling Bolts System for Fracture Splitting Crankcase Bearing Block of Engine;

裂解发动机箱体主轴承座螺栓装配系统研究与设计

plain bearing housing with bearings

装有轴承的普通轴承座

housing bearing plain without bearings

未装轴承的普通轴承座

Sparated Bearing block for main transmission shaft Easy for maintenance and fix.

主传动轴承座可分拆结构,方便安装及维护.

upper center crankshaft bearing

曲轴主轴承上中轴瓦

Plain Bearing Block Housings are made up of cap, base ,aluminum bronze bushing and installing bolts, which mainly bear radial load.

滑动轴承座由上盖、底座、剖分轴瓦（铝青铜），安装螺栓组成，主要承受径向载荷。

Rolling bearings accessories--Plummer block housings--Boundary dimensions

GB/T7813-1998滚动轴承附件轴承座外形尺寸

housing for ball-, roller or needle roller bearings, not incorporating a bearing

未装轴承的滚珠、滚柱或滚针轴承座

Torrington needle bearing

冲压外座圈滚针轴承

alignment of bottom casing and bearing seating

下汽缸和轴承座找正

spring seat bearing adjusting nut

弹簧座轴承调整螺母

bracket incorporating a bearing housing or designed to house a bearing [incorporating ball or roller bearings]

装有轴承座或设计放置一个轴承[装有滚珠或滚柱轴承的托座]