基本释义:

转子轴承锁紧螺母

网络释义

1)rotor bearing locknut,转子轴承锁紧螺母

2)bearing lock nuts,轴承锁紧螺母

3)stern tube nut,尾轴管锁紧螺母

4)locking nut,锁紧螺母

5)lock nut,锁紧螺母

6)nut lock(ing),螺母锁紧

用法和例句

The early failure of the stopping pad and locking nut of train electironic machine axle is analysized in the present work.

由此得到:构件失效的主要原因是:锁紧螺母的热处理工艺不当,止动垫电镀过程发生氢脆。

The fuel injector cooling system of the Mak 8M453C four-stroke, pulse turbocharger type diesel engine is introduced, and the analysis on the cause of the locking nut crack of the nozzle in fuel injector is given for preventing the problem.

介绍了Mak 8M453C 型四冲程脉冲增压柴油机的喷油器冷却系统的组成,并分析了喷油器喷嘴锁紧螺母裂纹的原因及预防裂纹的措施。

The problems in lock nut of roll axis and sleeve of precision rolling mill are analyzed,some measures proposed,good result got.

针对高速线材生产中,精轧机辊轴及隔套锁紧螺母存在的问题进行分析,提出了改进措施,取得了较好效果。

Flared type tube fittings--Locknut

GB/T5649-1985扩口式管接头锁紧螺母

Flared type tube fittings--Back-up washer

GB/T5652-1985扩口式管接头锁紧螺母垫圈

" Prevailing torque type all-metal hexagon nuts, style 1"

GB/T6184-19861型全金属六角锁紧螺母

" Prevailing torque type hexagon nuts (with non-metallic insert), style 2"

GB/T6182-19862型非金属嵌件六角锁紧螺母

" Prevailing torque type hexagon nuts (with non-metallic insert),style 1"

GB/T889-19861型非金属嵌件六角锁紧螺母

Prevailing torque type all-metal hexagon nuts with flange

GB/T6187-1986全金属六角法兰面锁紧螺母

" Prevailing torque type all-metal hexagon nuts, style 2--Property class 9"

GB/T6186-19862型全金属六角锁紧螺母9级

Turn the locking bolt so that it is fixed on the bake cover or the flange plate.

安装后必须将锁紧螺母锁紧在电机后端盖或法兰盘上。

Malleable cast iron pipe fittings--Type size--Backnuts

GB/T3289.30-1982可锻铸铁管路连接件型式尺寸锁紧螺母

" Prevailing torque type all-metal hexagon nuts, style 2--Property classes 5,8, 10 and 12"

"GB/T6185-19862型全金属六角锁紧螺母5,8,10和12级"

Prevailing torque type hexagon nuts with flange (with non-metallic insert)

GB/T6183-1986非金属嵌件六角法兰面锁紧螺母

To replace seat/ stem module shut off supply, loosen locknut and back off adjusting screw.

要更换阀座/杆模块，先关闭供应管道，松开锁紧螺母，退出调节螺丝。

Side view of hexagonal jam nut. Selection box height represents thread diameter.

六角锁紧螺母的侧面图。选择框高度代表螺纹直径。

Mechanical properties of fasteners--Prevailing torque type steel hexagon nuts

GB/T3098.9-1993紧固件机械性能有效力矩型钢六角锁紧螺母

spring stop-nut locking fastener

弹簧防松螺母锁紧件

After handle is reinstalled, just tighten up the nuts and washers with force. After gear box is reinstalled, just tighten up the screws and washers with even force.

重新安装把手将螺母及华司用力锁紧即可。重新安装齿轮箱将跟螺丝及华司用力平均锁紧即可。

Nuts are full steel self locking eliminating temperature and moisture influence.

螺母采用全钢制自锁紧式，消除了温度以及湿度的影响。

reverse anchor jam nut

反向锁闭机构紧固螺帽