基本释义:

锥面包络环面蜗杆

网络释义

1)toroid enveloping worm with cone generatrix,锥面包络环面蜗杆

2)cone-generated enveloping worm gearings,锥面二次包络环面蜗杆

3)rolling cone enveloping hourglass worm pair,滚锥包络环面蜗杆副

4)worm enveloped by conical surface,锥面包络蜗杆

5)hourglass worm,包络环面蜗杆

6)cone enveloping cylindrical worm,锥面包络圆柱蜗杆传动

用法和例句

Takes cone-generated enveloping worm gearings as researching object,on the bases of 3D entity modeling,and taking full use of the second developing function,and Visual Basic 6.

以锥面二次包络环面蜗杆传动为研究对象,在三维实体造型的基础上,充分利用AutoCAD的二次开发功能,以V isual Basic 6。

A reasonable coordinate system of rolling cone enveloping hourglass worm pair is set up,and the contacting lines of the worm pair are deduced and calculated.

在合理选择滚锥包络环面蜗杆副标架、准确推导啮合方程和接触线方程的基础上,利用MATLAB强大的科学分析计算功能和函数可视化功能绘制出一条蜗杆副接触线,探索出一种能快速、准确地求解滚锥包络环面蜗杆副接触线的方法,对于进一步分析滚锥包络环面蜗杆副传动非常有价值。

Establish the three dimensional solid of the worm enveloped by conical surface.

依据啮合原理,准确描述锥面包络蜗杆的轴向截面曲线以及齿根的过渡曲线;以SolidWorks为平台,以VBA为开发语言,调用SolidWorks的API函数,建立锥面包络蜗杆的三维实体,为理论分析和工程分析提供准确的三维实体造型。

With the Contact Finite Element Method, the distribution and contact zone of the hourglass worm gearing are calculated.

用罚函数接触有限元法分析了包络环面蜗杆传动的轮齿应力、接触齿面上接触力分布、接触区的形状以及接触中心的偏移状况 ,研究了不同载荷作用下瞬时啮合齿对间的载荷分配和接触区域的变化规律 ;并用三维光弹实验验证了在载荷作用下包络环面蜗杆传动轮齿间的接触应力分布和载荷分配情况 ,其实验测试结果与用接触有限元分析所得数据具有一致性。

Based on the theory of conjugate surface and computer graphics, a solid modeling method of hourglass worm gearing is presented.

基于曲面包络理论和计算机图形学，讨论了包络环面蜗杆的实体建模方法，并在实体模型的基础上进行了包络环面蜗杆传动的装配模拟，配对齿面的间隙和干涉分析，考察了加工和装配参数的调整对齿面啮合与接触的影响。

Analyzing the finger conical second enveloping ring-surface worm transmission by the fitting theory, the general mathematical model is put forward Modifing( a a angle add( I formation can eliminate oringinal arranging dense contact wire gear surface.

通过对指状锥面二次包络环面蜗杆传动进行啮合理论分析，提出了标准传动的通用数学模型。

Planar double-enveloping worm gearing reducer technical specification

GB/T16446-1996平面二次包络环面蜗杆减速器技术条件

Planar double-enveloping worm gearing accuracy

GB/T16445-1996平面二次包络环面蜗杆传动精度

Planar double-enveloping worm gearing terminology

GB/T16442-1996平面二次包络环面蜗杆传动术语

Research on Design and Assessment of Plane-Generated Double Enveloping Worm Gearing;

平面二次包络环面蜗杆传动设计与评价研究

Developed of Dedicated Grinding Machine on Plane-Quadratic-Envelope Annular Worm;

平面二次包络环面蜗杆专用磨床的开发

On Establishing the Parameter of Planar Two Packs Worm;

平面二次包络环面蜗杆副的参数化建立

Modeling research of planar double-enveloping torus worm-drive

平面二次包络环面蜗杆传动的实体建模研究

Analysis of Contact on Modified Planar Double-enveloping Worm Pairs

修正型斜平面二次包络环面蜗杆副的接触型式

Study on Direct Digital Modeling for Double- enveloping Hourglass Worm Drive;

二次包络环面蜗杆传动直接数字化建模研究

Planar double-enveloping worm gears reducer-dimensions and load capacity

GB/T16444-1996平面二次包络环面蜗杆减速器系列、润滑和承载能力

Planar double--enveloping worm gearing geometrical data symbols

GB/T16443-1996平面二次包络环面蜗杆传动几何要素代号

Research on the Digital Modeling Theory and Simulation Methods of Planar Double-Enveloping Toroid Worm Gear Drive;

平面二次包络环面蜗杆副数字化造型理论及仿真研究

Research on NC Machining and Manufacturability of Plane-generated Double Enveloping Hourglass Worm Pair;

平面二次包络环面蜗杆副数控加工与可制造性研究

Developed and Cutting Study of NC Grinding Machine on Plane-Quadratic-Envelope Annular Worm;

平面二次包络环面蜗杆数控磨床的开发及磨削研究

Research on the Non-contact Measurement Method of the Precision of the Planar Double-enveloping Annular Worm Based on CCD;

基于CCD的平面二次包络环面蜗杆精度的非接触检测方法研究

Study on Parameter Optimum Design of Quasi-Plane Double-Enveloping Hourglass Worm Gears;

准平面二次包络环面蜗杆传动的参数优化设计研究

The Research on CAD Prototype System for the Plane Double-enveloping Worm-gear Reducer;

平面二次包络环面蜗杆减速器CAD原型系统的研究