基本释义:

准平面应力

网络释义

1)quasi plane stress,准平面应力

2)plane stress/strength criterion,平面应力/强度准则

3)plane stress,平面应力

4)Stress plane,应力平面

5)quasi-plane strain,准平面应变

6)plane stress wave,平面应力波

用法和例句

Constitutive model for concrete under plane stress;

平面应力状态下混凝土的本构模型

To solve problem of the plane stress with MATLAB;

基于MATLAB的平面应力问题研究

In order to master the evolution law of Al 5052,three plane stress states that were uniaxial tensile,plane strain and equalbiaxial tensile were obtained by biaxial tensile loading.

为掌握铝合金5052织构演化规律,通过双向拉伸试验模拟铝合金板材受平面应力作用下的单向拉伸、平面应变、等双拉三种典型应变状态,获得取向分布函数并进行了定量分析。

Experimental research on deformation localization of mud-sand stone in quasi-plane strain state;

准平面应变条件下泥砂岩变形局部化的试验研究

The two cases of plane stress and plane strain will be discussed separately.

平面应力和平面应变这两种情况将分开讨论。

There are two plane problems in the theory of elasticity, the problems of plane strain and of plane stress.

弹性理论中有两类平面问题，即平面应变和平面应力问题。

Supplementary Regulations on Deciding the Place of Main Plain in the State of Plain Stree;

确定平面应力状态主平面位置的一个补充规定

Under these conditions the state of stress is predominantly plane stress.

在这些条件下，应力状态是平面应力占优势。

The Study of Using Acoustoelastic Method for the Stress Analysis in a Plane Stress Field

用声弹性法对平面应力场进行应力分析的研究

Shortcut of Determining the Direction of the Largest Main Stress under the Status of Plane Stress;

平面应力状态下判定最大主应力方向的捷径

Intuitive Judgment of Maximum Principal Stress′s Direction of Plane Stree Statements;

平面应力状态最大主应力方向的直观判定

Further Discussion for Explorations Confirming Method of Principl Stress Direction under the Plane Stress Condition;

平面应力状态主应力方向确定方法再探

We defined the conditions of the plane stress distribution of thin plates subjected to in-plane forces.

我们定义了承受平面力的薄板平面应力分布条件。

A body is said to be in a state of plane stress or alternatively in a two-dimensional or biaxial state of stress.

据称该物体处于平面应力状态或二维应力状态或双轴应力状态。

Issues About Out-plane Tensile Stress of Adhesive Regions of Composite Integrated Structure

复合材料整体化结构胶合面的出平面应力问题

Quick algorithm for flat stress analysis between two sections;

平面应力状态分析中任意两截面上应力的新解法

The analysis covers plane strain, plane stress and anti-plane strain shear cases.

分析包括了平面应变、面应力和出平面应变剪切三种情况。

Shear stress arises from forces that are parallel to the plane of the cross section.

切应力由平行于截面的力引起。

Relation of Out-of-Plane and In-Plane Stresses for Elastic-Plastic Plane Strain Problems

平面应变弹塑性问题中面外应力与面内应力的关系

On Perfectly Stress Field at a Mixed-Mode Crack Tip under Plane and Anti-Plane Strain

关于平面应变和反平面应变复合型裂纹尖端的理想塑性应力场

STEP HOLE DRILLING METHOD FOR MEASURING PLANE RESIDUAL STRESSES IN DEEP LAYER

钻阶梯形孔法测量深层平面残余应力

The Preliminary Study on the Computation of Degree of Reliability of Plane Prestressed Cable-Arch Structure;

平面预应力索拱结构可靠度计算初探