基本释义:

装载循环

网络释义

1)loading cycle,装载循环

2)cyclic load,循环加载

3)cyclic loading,循环加载

4)cyclic loading,循环载荷

5)cyclic load,循环载荷

6)cyclic loads,循环载荷

用法和例句

In order to investigate and compare the ultimate load-carrying capacity,hysteretic behavior and dynamic characteristics of welded and bolted steel frames;6 single-span two-story steel frames were tested under cyclic loading.

为了探讨、比较焊接和螺栓连接钢框架的极限承载能力、滞回性能及动力特性,本文进行了6榀1∶2比例的单跨双层钢框架循环加载试验和动力特性测试,其中焊接、端板螺栓连接、角钢螺栓连接钢框架各两榀。

Research on shear behavior of reinforced concrete beams under cyclic loading;

循环加载对钢筋混凝土梁抗剪性能影响研究

3-D constitutive relation for rock joints during cyclic loading;

岩体结构面三维循环加载本构关系

Constitutive model for soils under the condition of cyclic loading;

循环加载条件下土的应力路径本构模型

Fatigue failure of rubber composite under cyclic loading;

橡胶复合材料在循环载荷下的疲劳损伤特性

Space-time evolution rules study of acoustic emission locations in rock under cyclic loading;

循环载荷作用下岩石声发射时空演化规律

Experimental research on the acoustic emission characteristic of sandstone under the different experimental condition of cyclic loading;

循环载荷作用时不同实验条件下砂岩的声发射特征实验研究

Nonlinear finite element analysis on seismic behavior of two kinds of slabs under cyclic load;

循环载荷作用下两类楼板抗震性能的非线性有限元分析

Experimental study on composite slabs under cyclic load;

循环载荷作用下组合楼板的试验研究

In order to study the elas to plastic response of the beam to column welded connection under the seismic load and improve the earthquake resistant performance of welded joint,the non linear FEM analysis of "H" and "Dog Bone" Type of welded connection under the simulating seismic cyclic load was carried out by utilizing the ANSYS programming package.

为了研究建筑钢结构梁柱焊接接头在地震作用下的弹塑性响应 ,提高焊接接头的抗震性能 ,采用大型有限元软件ANSYS对建筑钢结构中比较常见的H形梁柱焊接接头和“狗骨式”焊接接头在模拟地震循环载荷作用下进行了弹塑性有限元分析 ,得到了梁端加载点的载荷 -位移滞回曲线和节点焊接接头的等效应力分布。

The remaining life of speciment is dependent upon loading history, under two level cyclic loading.

两级循环加载条件下，材料的剩余寿命强烈地依赖于加载历史。

Abstract: The remaining life of speciment is dependent upon loading history, under two level cyclic loading.

文摘:两级循环加载条件下，材料的剩余寿命强烈地依赖于加载历史。

Constitutive Theory of Crystal Plasticity under Non-Proportional Cyclic Loading;

非比例循环加载下的晶体塑性本构理论

Improvement of Nonlinear Constitutive Model for Rock Fractures under Normal Cyclic Loading

岩体节理非线性法向循环加载本构模型的改进

Creep Behavior of Saturated Soft Clay Under Cyclic Loading in Undrained Condition

不排水循环加载作用下饱和软粘土的蠕变特性

Damage Behavior of Eutectic Silicon Particles in ZL101 Aluminum Cast Alloys During Cyclic Loading

循环加载下铸造铝合金中硅颗粒的破坏行为

Numerical analysis of ultimated bearing capacity behavior of suction caisson foundations under cyclic loading

循环加载条件下吸力式沉箱基础极限承载力特性分析

A STUDY ON FATIGUE CRACK INITIATION AND SMALL CRACK GROWTH UNDER THE CYC LIC COMPRESSIVE LOAD CONDITION

压缩循环加载下缺口裂纹的萌生与小裂纹扩展规律研究

A Study of the Effect of Cyclic Mechanical Loading and Artifical Saliva on the Durability of the Dentin Adhesive;

循环加载及人工唾液浸泡对牙本质粘接耐久性影响的实验研究

An in Vitro Study: Effect of Cyclic Loading to the Fracture Resistance of Teeth Restored with Different Post and Core Systems;

循环加载对不同桩核修复后牙体抗折强度影响的对比研究

Design and Analysis of a Specimen of Steel Composite Staggered Truss Structures;

多层混合式交错桁架钢结构体系循环加载试验试件设计及分析

THE CONTACTING COMPUTATION METHOD FOR SIMULATING THE MODEL Ⅰ CRACK PROPAGATION PROCESS IN CONCRETE UNDER CYCLIC LOADING

循环加载条件下混凝土Ⅰ型裂缝扩展模拟的接触算法

The Effects of Annealing Treatments on Superelastic Fatigue Behavior and Lifespan of NiTi Shape Memory Alloy under Cyclic Loading

循环加载下热处理对NiTi记忆合金丝超弹性变形行为和寿命的影响

Microleakage between tooth canal dentin and three cements for bonding fiber posts under cyclic mechanical loading

循环加载下3种黏结剂与根管牙本质间微渗漏的对比研究

The test study proves that the different loading systems have a great influence on the aseismic performance of the reinforced concrete column.

结果表明,不同循环加载制度对钢筋混凝土柱的抗震性能有较大的影响。

Study of deformation of rock salt under cycling loading and unloading

循环加、卸载下盐岩变形特性试验研究

Study on the Rock Mechanics Characteristic by Cyclic Load and Statics Load Fit Together;

循环荷载与静载组合加载下岩石的力学特性试验研究

Experimental study of skarn under uniaxial cyclic loading and unloading test and acoustic emission characteristics

矽卡岩单轴循环加卸载试验及声发射特性研究