maximum tensile stress

精品项目网 2024-05-21 20:20:12

基本释义:

最大法向应力

网络释义

1)maximum tensile stress,最大法向应力

2)maximum normal stress theory,最大法向应力理论

3)maximal radial stress,最大径向拉应力

4)maximum circumferential stress,最大周向应力

5)direction of the largest main stress,最大主应力方向

6)maximum tangential stress,最大切向拉应力

用法和例句

The maximum shear stress and the maximum tensile stress on the coating and substrate interface were analyzed.

通过对涂层与基体界面最大剪切应力和最大法向应力的分析,比较了模型中不同基体台阶深度、涂层尺寸对界面结合强度的影响。

Through the differential expression,the variation of maximal radial stress in flange region for circle sheet drawing is discussed and compared with the method by qualitative explanation.

文章通过微分表达形式,对拉深凸缘最大径向拉应力的变化及其影响因素进行了分析论证,并与目前通用的直接对最大径向拉应力公式作定性解释的方法作了比较。

It is of great significance in engineering and teaching to determine the direction of the largest main stress under the status of plane stress.

平面应力状态下最大主应力方向的判定在工程及教学中具有重要意义,应用平面应力理论可以找到判定其方向的快捷方法,并引用实例得到印证。

Shortcut of Determining the Direction of the Largest Main Stress under the Status of Plane Stress;

平面应力状态下判定最大主应力方向的捷径

Intuitive Judgment of Maximum Principal Stress′s Direction of Plane Stree Statements;

平面应力状态最大主应力方向的直观判定

Thus the directions that emerge for extremizing the normal stress are the directions corresponding to the principal stresses.

因此,产生最大正应力的方向就是相应于主应力的方向。

Two Easy Ways To Determine the Directions of the Principal Stresses In A Plane Stress State;

二向应力状态主应力方向判别的两种简易方法

the direction of maximum tension moves asymptotically toward the direction of the shear.

最大张力的方向是逐渐趋进于切线的方向。

In the course of time, they are subjected to compressive stresses in the direction of bedding.

最后,它们沿层理方向承受压缩应力。

(9) We could mass the largest number of troops in the Lungkang sector.

(九)我在龙冈方向能集中最大兵力。

Further Discussion for Explorations Confirming Method of Principl Stress Direction under the Plane Stress Condition;

平面应力状态主应力方向确定方法再探

A Simple Rule of Visual Determining Main Direction s General Position Under Horizontal Stress State;

直观确定平面应力状态下主方向大体位置的简单规则

The greatest stress is found at the location on the cross section where V is the largest.

最大应力出现在横截面上v为最大的地方。

Iris recognition based on maximal responding orientation of phase congruency

基于相位一致性最大响应方向的虹膜识别方法

PORE PRESSURE OF SOFT CLAY UNDER ROTATING PRINCIPAL STRESS

主应力方向偏转下的软粘土孔隙压力性状

Calculation and statistical analysis of maximal axial stress at mining subsidence area

采空塌陷区管道最大轴向应力计算及统计分析

Description of Work. Contractor shall devote his full time and use his best efforts to make sales of chemical products to the Company's customers.

工作标的。承包方应全职,并尽其最大努力向公司客户销售其化学药品。

The two simple ways of judging the major stress direction under the plane stress of the unit body;

从单元体表面应力状态判断主应力方向的两种简便方法

An optimization design method for bending rigidity of main shaft for large wind turbines

大型风力机主轴最佳抗弯刚度的设计方法

Experimental study of stress-strain properties of intact soft clay considering the change of principal stress direction

考虑主应力方向变化的原状软黏土应力应变性状试验研究

The compressional stress mainly comes from SW, and the NE direction acts as a resistance.

挤压应力主要来自南西方向、北东方向起阻挡作用。

下一篇:没有了
上一篇:optimum cutting speed
精彩图文
相关推荐
  1. floitite

    精品项目网为您提供帘片状岩floitite是什么意思,floitite翻译,floitite例句,floitite用法等有关,floitite单词知识大全供您查询使用!...

    0 条评论 59 2024-05-17 16:37

  2. gamma ray laser

    精品项目网为您提供γ激光器gamma ray laser是什么意思,gamma ray laser翻译,gamma ray laser例句,gamma ray laser用法等有关,gamma ray laser单词知识大全供您查询使用!...

    0 条评论 59 2024-05-16 23:41

返回顶部小火箭