基本释义:

线路测试连接口

网络释义

1)LTC Line Test Connector,线路测试连接口

2)line test connector,线路测试连接器

3)line test-access point,线路测试入口点

4)connecting test,连接测试

5)Test interface,测试接口

6)interface testing,接口测试

用法和例句

In this paper,the author discusses common faults in connecting test of LAN in the light of analysing inner network test of Windows 95/98/ME,Windows NT/2000/XP and other OS,and puts forward some eliminating methods.

结合分析Windows95/98/ME、WindowsNT/2000/XP等操作系统中内置的网络测试工具,研究了局域网连接测试中常见的故障,给出了具体的排除方法。

Based on the principals of IC test interface and the structures of test systerm, methods of improving test circuits on type SL431L power IC is proposed.

基于对IC测试接口原理和系统结构的阐释,具体针对型号为SL431L的电源芯片,提出改进测试电路的方法,电压测试值的波动范围小于3mV。

This command runs a connectivity test on DS0 c of DS1 b on AP a; .

该命令将对APa上DS1b的DS0c进行连接测试。

CodeTEST Connectivity Test Target Board Configuration Technology

CodeTEST连接测试目标板配置技术研究

Wires running from the tester interface to the probes carry test signals back and forth.

连接测试设备和探针的导线来回的传递测试信号。

Could not establish a connection for receiving test results.

无法建立接收测试结果所需的连接。

A Testing System for Optical Fiber Connector End Surface Based on Microscopic Interferometry

光纤连接器端面的显微干涉测试系统

Connect bypass hose between vent needle valve and loosely connect to test cock No.1.

在排气针形阀上连接旁路软管，并将其松散连接到测试旋塞1号上。

To perform the test, make sure the printer is connected, turned on, and online. Then click Test.

开始测试之前，请检测打印机是否连接到计算机，电源是否打开，是否连接。然后单击“测试”。

Test connection failed because of an error in setting the window handle property. %1 Continue with test connection?

测试连接失败，因为设置窗口句柄属性时发生错误。%1 继续使用测试连接吗？

Open test cock3. Installing EZ-TC adaptor fitting opens test cock3.

开启测试旋塞3号。安装EZ-TC适配器连接件，开启测试旋塞3号。

The machanism is simple and robust because the strain gauge is directly attached to the torque detector.

结构简明、固，扭力仪直接与扭力测试部分相连。

Test connection failed because of an error in storing the property values. %1

测试连接失败。因为保存属性值时发生错误。%1

Test connection failed because of an error in initializing provider. %1

初始化提供程序时发生错误，测试连接失败。%1

Add network delays to simulate connection speeds in your test environment.

添加网络延迟，模拟测试环境中的连接速度。

Electrical tests and measuring procedures for radio-frequency coaxial connectors-Screening effectiveness

GB/T12270-1990射频同轴连接器电气试验和测试程序屏蔽效率

Failed to connect. Check connection properties and try again.

连接失败。检查连接属性并重试一次。

Lock the hydraulic connector and test the connecting force with 50.000 lbs overpull.

销紧液压连接器用50000磅试验连接拉力。

mechanical back to back test

机械连接式效率试验

TEST 51A CONTINUED FROM THE PREVIOUS PAGE.

接上页测试５１Ａ。