基本释义:

角钢嵌条,三角焊缝

网络释义

1)angle fillet,角钢嵌条;三角焊缝

2)corner bead,墙角护条;角焊缝

3)Right angle welding seam,直角角焊缝

4)fillet angle,角焊缝角度

5)oblique-angle fillet weld,斜角角焊缝

6)fillet weld,角焊[缝];贴角焊;填角焊缝

用法和例句

A Research into the Basic Formulation of the Calculation of the Welded Seam Strength of Right-Angle Welded Seam;

关于直角角焊缝强度计算基本公式的探讨

Application of ultrasonic sensor in automatical welding of right-angle welding seam

超声波传感器在直角焊缝自动焊接中的应用

The box corner welds were made with E70 electrodes.

箱型梁内角部焊缝所用的电焊条为E70。

Quality Control of the Fillet Weld in the Tube and Tube Sheet of Heat Exchanger

换热器管-管板角焊缝焊接质量的控制

Study of Length Calculation of Three Side Welded Lap;

三面围焊搭接角焊缝长度计算的探讨

For straight seams, we use submerged arc welding or carbon dioxide welding; for some corners and small areas, we still use manual welding.

对于长直板缝，我们用埋弧焊或二氧化碳气体保护焊；拐角处和小地方，还用手工焊。

Parameters optimization of fillet weld sealing joint in high pressure hydrogenation heat exchange

加氢换热器角焊缝密封接头焊接工艺参数优化

Analysis on welder's operating methods influencing quality of fillet weld of stainless sheet plate

焊工操作手法对不锈钢薄板角焊缝质量的影响

Welding the welds which are stagger first, then is the straight ang long weld.

先焊错开的端焊缝，后焊直通长焊缝。

DC seam welder-"C"France Type.

直流缝焊机,"C"型。

Effect of Outside Welding Groove Angle on Weld Quality of X80 Grade SSAW Pipe

外焊坡口角度对X80级螺旋埋弧焊管焊缝质量的影响

The type of simple joints is widely used in tubular structures, but determination of strength of welds in such kind of joints has not been well solved yet.

直接汇交钢管节点在管结构中广泛采用,但这类节点的角焊缝强度的确定还没有很好解决。

Security assessment of over roundness circumferential weld of the pressure vessel

压力容器环向焊缝棱角度超标的安全评定

Inspecting the Storage Tank's Bottom Plate Fillet Welds by PT

渗透检测在大型储罐底板角焊缝检测中的应用

Fillet Welding Seam Tracking Based on a Mobile Robot with Rotational Arc Sensor

以旋转电弧为传感器的移动机器人角焊缝跟踪

AN APPROACH TO MAGNETIC PARTICLE DETECTION TECHNOLOGY USED FOR ANGLE WELD JOINT ON SMALL SIZE TUBE SOCKET BASED ON YOKE MAGNETIZATION METHOD

小尺寸管座角焊缝磁轭法磁粉检测工艺探讨

Fillet Weld Tracking System Based on PLC and Optical Sensor

基于PLC和光学传感器的角焊缝跟踪系统

Experiment on tensile and shear strength of front fillet welded joint post-high-temperatures

高温后正面角焊缝抗拉剪切强度的试验