基本释义:

抗剪强度残余强度

网络释义

1)residual strength,抗剪强度残余强度

2)residual shear strength,残余抗剪强度

3)residual angle of internal friction,抗剪强度残余内摩擦角

4)the residual shear strength,残余剪切强度

5)residual compressive strength,残余抗压强度

6)residual compressive strength,抗压残余强度

用法和例句

In designing and calculating,several measures such as using the indexes of residual shear strength of sliding-belt soil and double-parameter method etc are ta.

为提高计算结果的可靠度 ,采用了滑带土的残余抗剪强度指标和双参数法等手段。

relation between normal stress and peak shear strength, relation between normal stress and residual shear strength, and relation between normal stress and frictional shear strength), the shear deformation properties of two kinds of cement concretes, the characteristics and description of shear faces.

介绍了丹江口大坝后期加高现场原位抗剪试验研究成果，内容包括：法向应力与峰值抗剪强度的关系；法向应力与残余抗剪强度的关系；法向应力与摩擦抗剪强度的关系；两种水泥混凝土剪切变形特性；剪切面特征及描述。

For the purpose of solving the problem, this paper focuses on the residual shear strength of reinforced concrete bridge columns.

针对这种情况，本文开展了强震动下钢筋混凝土桥墩残余剪切强度及其抗剪机理的研究，并做了下列主要工作： 1。

Experimental investigation on the effects of moisture content and fiber on both explosive spalling and residual compressive strength of high performance concrete(HPC) after exposure to high temperatures was presented.

研究了含湿量和纤维对高性能混凝土高温爆裂及高温后残余抗压强度的影响。

This paper presented the performance of shrinkage compensating concrete exposed to high temperatures, concluding residual compressive strength and Cl--penetrability performance.

本论文研究了补偿收缩混凝土高温性能特征,包括残余抗压强度和氯离子渗透性能。

Test of concrete under high temperature and the study of residual compressive strength after high temperature;

混凝土高温试验及高温后抗压残余强度研究

Study on Residual Shear Strength of Reinforced Concrete Bridge Columns under Strong Seismic Ground Movement;

强震动下钢筋混凝土桥墩的残余剪切强度研究

testing methods for shear strength of plastics by punch tool

塑料剪切强度试验方法

uniform strain shearing strengh tester

等应变剪切强度测试仪

"Maximum shear Strength 63Kg/mm2(90,000psi) maximum (based on 75% yield) "

剪切强度最大63Kg/mm2(90000psi)(为屈服强度的75%)

Testing Method for Tensile and Shear Strength of High Strength Photosensitive Glue

高强度光敏胶拉伸剪切强度测试方法

The residual strain is the additional shear strain created with the increase of pore pressure due to cyclic shear under initial shear stress.

残余应变是由于周期剪切引起孔隙压力增长,在初始剪力作用下产生的附加的剪应变.

MICROSTRUCTURE AND HARDNESS OF ADIABATIC SHEAR BANDS IN HIGH STRENGTH STEELS

高强度钢中绝热剪切带的组织和硬度

The LG952 Lift Arm Welding Residual Stress and Static Strength Analysis

LG952动臂焊接残余应力和静强度分析

The Influence of Residuary Intensity Modulation of Y Waveguide on the Performance of IFOG

Y波导残余强度调制对IFOG性能的影响

Ebonite--Method of test for shearing strength

GB/T1700-1982硬质橡胶抗剪切强度试验方法

testing methods for impact shear strength of adhesive bonds

胶粘剂剪切冲击强度试验方法

Thermal sprayed metallic coatings-Determination of shear strength

GB/T13222-1991金属热喷涂层剪切强度的测定

Testing methods for shear strength of plastics by punch too

GB/T15598-1995塑料剪切强度试验方法穿孔法

testing methods for shear strength of adhesive bonds by tensile loading

用拉伸负荷测定粘合剂剪切强度

testing methods for strength properties of adhesives in shear by compression loading

胶粘剂压缩剪切强度试验方法

The shear strenth is equal to the cohesion of substance.

剪切强度等于物质的内聚力。

Test Attempt to Shear Strength of in Terface for Embedded Optical Fiber Sensors

埋入式光纤传感器界面剪切强度实验

Effect of reflow soldering on IMC and shear strength of SnAgCu solder joint

回流焊对SnAgCu焊点IMC及剪切强度的影响