基本释义:

挠曲公式

网络释义

1)fiexural formula,挠曲公式

2)deflection tolerance,挠曲公差

3)flexural mode,挠曲方式

4)rollflex coater,挠曲辊式涂布机

5)deflection,挠度，挠曲

6)flexure,挠曲

用法和例句

In order to know the low temperature performance of polyfluortetraethylene used as sealing material,the mensuration is done that constriction plate and tubular test piece, and of plate flexure in the range of -100 to -40℃.

为了考查聚四氟乙烯用做密封材料时的低温性能,在-40至-100℃的温度范围内,分别对板状和管状试件的收缩以及板状试件的挠曲进行了测定。

The nonlithostatic stresses, regions of failure and flexure profiles have been computed as the upper crustal layer is extended by progressive increments.

计算了以一定增量逐渐拉伸上地壳层时各个阶段的非静岩应力 (Nonlitho staticstress)、塑性破裂 (Plasticfailure)分布及挠曲剖面 (Flexureprofile)。

Compensating For the Super-Long Precision Rubbing Rollor’s Flexure

对TFT-LCD摩擦设备的超长精密摩擦滚子进行变形量计算和测量,采用切削补偿的方法可以有效地抵消摩擦滚子因自重产生的挠曲变形,提高摩擦质量。

flexural fatigue

弯曲疲劳,挠曲疲劳

flexural strain

挠曲应变,弯曲应变

flexural resilience

弯曲回弹性,挠曲回弹性;弯曲回弹能,挠曲回弹能

crossbreaking strength

横断裂强度, 挠曲强度

Flexural Modulus - 1% Secant (Based on ASTM D 790A)

挠曲模量–1%正割（根据ASTMD790A）

nonlinear flexible spacecraft

非线性挠曲宇宙飞船

flex cracking test

（涂层的）耐屈挠龟裂强度试验,挠曲疲劳试验

ANALYTIC SOLUTION OF BENDING SURFACE PROBLEM OF FAN-SHAPED PLATE

扇形薄板弯曲问题挠曲面的解析解

A still more difficult distinction is that between a sharp flexure and a fault.

区别尖锐的挠曲和断层更加困难。

Bend the end of the wire back.

将这根金属线的末端向后挠曲。

testing methods for flexural strength of adhesives

胶粘剂粘结挠曲强度的试验方法

Minimum of three inner wraps to prevent buckling.

最少三层内部包裹，有利于防止挠曲。

Howerer, under heavy load the shaft may deflect excessively.

但是，在重载作用下，轴会发生过度挠曲。

testing method for abrasion resistance of textile fabrics: flexing and abrasion method

植物耐磨性试验法：挠曲磨损法

Buckling Analysis of a Bottom Supported Main Vessel of FBR

底部支撑的快堆主容器挠曲分析(英文)

The Theoretical Study of the Felxoelectric Effect in Nematic Liquid Ctystal;

向列相液晶中挠曲电效应的理论研究

The Flexoelectric Effect and the Anchoring Energy of the NLC Cell;

挠曲电效应与向列相液晶盒的锚定能

Generally Spiral Trajectory Curvature Center of Curvature and Torsion

一般螺线曲率中心轨迹的曲率与挠率