基本释义:

浅基础基床系数

网络释义

1)coefficient of subgrade reaction,浅基础基床系数

2)foundation modulus,基床系数

3)coefficient of subgrade reaction,基床系数

4)coefficient of subgrade,基床系数

5)bed and foundation'entia,床身-基础系统

6)shallow foundation,浅基础

用法和例句

Discussion on influence factors of horizontal foundation modulus;

水平基床系数影响因素的探讨

While designing the retaining structure of foundation, the foundation modulus “ K ” is a very important parameter that is often decided on-the-spot test.

在绝大多数基坑设计中，基床系数Ｋ是一个重要的参数，一般通过现场试验确定。

The coefficient of subgrade reaction k is an important parameter in metro design.

基床系数是地铁设计计算的重要参数。

When the coefficient of subgrade reaction of soils under the anchor block is low, if the tension loads were applied one by one to steel strands of the cable, tension load loosening of pre-stressed anchor cable will occur.

在预应力锚索锚墩下部地基岩土的基床系数较低情况下,采用钢绞线逐根张拉来施加预应力会导致较大的预应力损失以及各钢绞线较显著的预应力不均。

Foundation soil coefficient of subgrade reaction is an important computation parameter in geotechnical engineering.

地基土基床系数是岩土工程中一个非常重要的参数。

On the curve,it is easy to establish the failure standard ,then the coefficient of subgrade and the internal relation can be obtained,and an empirical formula,which estimates the secant coefficient of subgrade from ultimate bearing capacity or CPT parameter,is suggeste

建议用双曲线模拟载荷试验曲线，易于建立地基破坏标准，求得地基基床系数及其内在关系。

Study on transverse limit capacity of shallow foundation with short pile;

带立柱浅基础侧向极限承载力探讨

An Analysis and Prediction of Final Settlement of Buildings on Shallow Foundations;

浅基础建筑物最终沉降量分析与预测

Calculation and application of shallow foundation bearing capacity on condition of soft soil;

软土浅基础地基承载力的计算及应用

A Back Analysis Method for Coefficient of Subgrade Reaction on Elastic Foundation Beam

一种分析弹性地基梁基床系数的反演方法

The Design and Implement of CNC System Based on 80486 for Milling Machine;

基于80486的铣床数控系统设计与实现

Grinder Parametric Analysis System Based on ANSYS;

基于ANSYS的磨床参数化分析系统

CAD/CAM System of Metal Plate Press Machining Basedon Punching Machine;

基于数控冲床的钣金加工CAD/CAM系统

Research on CNC System of Micro Machine Tool Based PMAC;

基于PMAC的微小型机床数控系统的研究

Study on the CNC System for the Serial-Parallel Kinematics Machine Tool Based on Visual C++;

基于Visual C++的混联机床数控系统的研发

The CNC Machine Faults Diagnosis Expert System Base on CLIPS;

基于CLIPS的数控机床故障诊断专家系统

Research of Embedded CNC System Based on ARM;

基于ARM的嵌入式机床数控系统的研究

Research and Application of Milling Machine CNC System Based on ARM;

基于ARM的铣床数控系统的研究与应用

The Study of CNC Tool Servo Drive System Based on DSP;

基于DSP的数控机床伺服驱动系统研究

Emulation Training System for CNC Lathes Based on VR;

基于VR技术的数控车床仿真培训系统

X52K Milling Machine Transformation Based on the Open Architecture Numerical Control System;

基于开放式数控系统X52K铣床的改造

Research of CNC Machining Simulation Based on Vericut Platform

基于Vericut平台的数控机床仿真系统研究

Study of CNC System of Turning-Milling Machine Tool Based GM-400

基于GM-400的车铣床数控系统研究

CNC Machine Control System Design Based on DSP

基于DSP的数控机床控制系统设计

Machining Simulation System for CNC Turret Punch Based on OPC

基于OPC技术的数控冲床加工仿真系统

Design of Five-axis NC Milling Machine System Based on PMAC

基于PMAC的五轴数控铣床系统设计

Requirements Analysis of CNC Machine Tool IETM System Based on UML

基于UML的数控机床IETM系统需求分析