基本释义:

塑性变形集中

网络释义

1)concentration of plastic deformation,塑性变形集中

2)non-uniform plastic deformation,局部集中塑性变形

3)localized plastic deformation,局集塑性变形

4)plastic deformation,塑性变形

5)plastic forming,塑性变形

6)plastic deformation,塑性形变

用法和例句

The results showed that both uniform plastic deformation and non-uniform plastic deformation consist of three stages,its strain hardening exponents are 0.

结果表明,P92钢均匀塑性变形和局部集中塑性变形过程都分为三个阶段,塑性变形过程中发生了剧烈的形变强化。

Effect of particle shape on uniaxial ratcheting of SiC_P/6061Al composites and its microscopic plastic deformation characteristics;

颗粒形状对复合材料单轴棘轮行为及其细观塑性变形特征的影响

Self-healing mechanism of inner crack in plastic deformation under high temperature;

高温塑性变形中孔隙性缺陷自修复机理

Plastic Deformation of a Mg-based Bulk Amorphous Alloy in Supercooled Liquid Region;

镁基大块非晶合金在深过冷液相区的塑性变形

The law of the microstructure transformation of SiC p/Al composite based on powder metallurgy in hot plastic forming is investigated.

实验研究了基于 PM的 Si Cp/Al复合材料在热塑性变形过程中显微组织的变化规律。

It was shown that the specific essential work (we) and specific plastic work (βwp) increased with the addition of EPDM and/or POE, which suggested that the elastermer had improved the material’s ability to resist crack propagation and produce plastic deformation.

结果表明,加入EPDM或POE后,共混物的比基本断裂功we和比塑性形变功βwp均有提高,说明弹性体的加入提高了材料抵抗裂纹扩展的能力和发生塑性形变的能力。

Under the suitable condition, plastic deformation at the bonding interface happened, the contact area increased, and the diffusion bonding was completed with the pores at the bonding interface being eliminated or significantly reduced.

结果表明 :采用适当的连接工艺 ,可使此种材料产生塑性形变 ,接触面积增加 ,空洞收缩和闭合 ,扩散进行充分 。

Under the condition of proper speed and temprature, the plastic deformation curves of ABS blends added with different lubricants were determined by using HAAKE- 9000 RHEOMETER.

采用HAAKE-9000型扭矩流变仪,在一定转速和温度下,测定了添加不同润滑剂时ABS体系的塑性形变曲线,对各种曲线进行分析,并研究了润滑剂的种类和用量对ABS力学性能和热性能的影响。

Plastic deformation concentrates at the ferrite area under the tensile stresses.

在拉应力作用下,塑性变形集中在铁素体区.

distortion energy plasticity condition

形状变形能塑性条件

The shale beds in between generally deform plastically.

夹在其中的页岩层通常是塑性变形。

Simulation of Q235 Steel Recrystallized Microstructure during Hot Forming Process;

Q235钢热塑性变形过程中微观组织模拟

On self-esteem consciousness behind the impression female in the collection of Huajian School;

从《花间集》中女性形象的塑造看男性本位意识

element of mechanics of plasticity

塑性变形的力学原理

extrusion stress

(塑性变形的)挤压应力

Microstructural Evolution and Deformation Mechanism during Large Elastic-Plastic Deformation for Single Crystal and Polycrystalline Copper

大塑性变形过程中单晶和多晶铜的组织演变及变形机理研究

The Study on Plastic Deformation Behavior of AZ31 Magnesium Alloy Rolling Sheets at Low and Moderate Temperature

AZ31镁合金轧制板材中低温塑性变形行为研究

Application of Element-free Galerkin Method to Metal Elasto-plastic Large Deformation Problems

无网格Galerkin法在金属弹塑性大变形问题中的应用

Measurement of strain distribution and matal flow in plastic bulk deformation

塑性体积成形中金属流动及应变分布的测试

Application of a New Method for Strain Measurement in Complex Forging

复杂锻件成形中塑性应变的测试新方法及应用

Dissolution behavior of second phases in Al-Cu binary alloy during severe plastic deformation

强塑性变形中Al-Cu二元合金相的溶解行为

Application of meshless natural neighbour method to large deformation problems of elasto-plastic material

无网格法在弹塑性材料大变形问题中的应用

ANALYSIS AND SIMPLIFIED APPROACH OF ELASTIC-PLASTIC DEFORMATION IN MEDIUM-TALL HYBRID STRUCTURES

中高层混合结构弹塑性变形简化计算方法

It is assumed that plastic deformation stems from the localization of shear strain.

岩样的塑性变形假设根源于塑性应变局部化。

However, the whole forming process which include infiltration, solidification and plastic deformation is quite complicated.

然而，整个成形过程集液态金属浸渍、固和塑性变形为一体，成形过程十分复杂。

Basis-free Representations for Tensor Functions and Their Applications in Elastoplasticity at Finite Strains;

张量函数的不变表示及其在弹塑性大变形中的应用