基本释义:

液化应力比

网络释义

1)Liquefaction stress ratio,液化应力比

2)Shear stress ratio of liquefaction,抗液化动剪应力比

3)con-liquefaction shear stress,抗液化剪应力

4)stress ratio,应力比

5)principal stress ratio,主应力比

6)reduced-stress,对比应力

用法和例句

The saturated, consolidated, undrained cyclic triaxial test results on these specimens show that the membrane penetration delays the development of pore water pressure and increases the liquefaction stress ratio by 14%～18%.

饱和固结不排水往返加荷三轴试验表明 ,由于橡皮膜嵌入的影响 ,延缓了孔隙水压力的上升 ,使试样的液化应力比增大 1 4%～ 1 8% ,在应用试验资料时 ,应予修

Based on experiment, liquefaction is evaulated through SPT、shear wave velocity method and con-liquefaction shear stress method.

以试验为基础，利用标准贯入击数试验、抗液化剪应力试验、剪切波速试验的结果进行液化判别。

Influence of stress ratio on fracture behavior of brittle materials and testification of strain criterion of fracture;

应力比对脆性材料断裂影响及应变断裂准则验证

Influence of stress ratio R on threshold value △K_(th) of fatigue crack propagation for welded joints of 09CuPCrNi steel;

应力比R对09CuPCrNi钢焊接接头疲劳裂纹扩展门槛值△K_(th)的影响

Effect of stress ratio on P-da/dN-Δk curve for 40CrMnSiMoVA steel;

应力比对40CrMnSiMoVA钢P-da/dN-Δk曲线影响研究

Effect of principal stress ratio in plane strain condition on void damage evolution;

平面应变下的主应力比对微孔洞损伤演化行为的影响

The tangent Poisson’s ratio of soil increases when the principal stress ratio increases.

通过基于局部变形测量的三轴试验,分析了泊松比的变化规律:在相同的成样方法和控制密度条件下,同一种材料的颗粒排列组合结构基本类似,在不同围压条件下的试样变形规律基本保持一致;随主应力比的增加,切线泊松比也随之增加,建立泊松比与主应力比之间的关系更符合泊松比取值规律。

Study on the Pile-soil Stress Ratio of the Capped PTC Pile Composite Ground;

带帽PTC桩复合地基桩土应力比研究

Fatigue crack growth probability model based on stress ratio

考虑应力比的疲劳裂纹扩展概率模型

Analysis of pile-soil stress ratio for double reinforced composite ground

双向增强体复合地基桩土应力比分析

Experimental research on pile-soil stress ratio of long-short-pile composite ground with rigid pile

刚性长短桩复合地基桩土应力比试验

CALCULATION FOR PILE-SOIL STRESS RATIO OF TWO-DIRECTION REINFORCED COMPOSITE FOUNDATION

双向增强体复合地基桩土应力比计算

Dynamical Calculation Method of Pile-soil Stress Ratio of Long-short-pile Composite Foundation

长短桩复合地基桩土应力比的力学计算方法

Strain is proportional to stress.

应变量与应力成正比。

proportionality of stress to strai

应力与应变的比例性

stamina, strength, and flexibility.

比如：速度、体力、力量、反应敏捷。

Contrastive Analysis of Stress-strain Relationship of Concrete in Work Restrained by CFRP

CFRP约束现役混凝土应力-应变对比分析

Comparing Study on the Total Stress Method and Effective Stress Method of the Core Wall Dams;

心墙坝有效应力与总应力算法的对比研究

Study on Ratios of Effects of Different Loads to Gravity on Curved Box-Girder Bridges

弯箱梁桥各种荷载应力与自重应力之比的研究

The ratio of stress to strain, or the stress per unit strain, is called an elastic modulus of the material.

应力与应变之比，即每单位应变的应力，叫做该材料的弹性模量。

The actual stress is not proportional to the bending moment.

实际上应力与弯矩不成正比。

Study on Finite Characteristic Ratio Theory for Analyzing Mechanical Responses of Soils;

土体力学响应的有限特征比理论研究

Comparison of residual stress formed in tubular ceramics/metal jointing process

管状陶瓷金属封接残余应力计算比较

Comparison on the Differences in Anti-Stress Capability between Domestic and Imported Piglet Varieties

中外品种仔猪抗应激能力差异的比较

The values for the stresses are assumed to be linearly proportional to the pressure.

这些应力值被假定为与压力成线性比例关系。