基本释义:

翼缘板

网络释义

1)flange plate,翼缘板

2)Flange slab,翼缘板

3)bottom flange plate,底翼缘板

4)flange splice,翼缘镶板

5)top flange plate,上翼缘板

6)hot rolled chord plate,热轧翼缘板

用法和例句

Research of design theory for flange plate of comb-type caisson;

梳式沉箱翼缘板设计理论的研究

The equipments features,technology process and control system are analyzed for the production of hot-rolled narrow strip and flange plate in a same 355 mm hot-rolled narrow strip production line.

分析了355 mm热轧窄带钢生产线共线生产热轧窄带钢和翼缘板的设备特点,工艺流程及控制系统。

In this paper,a theoretical analysis for the local buckling of the flange plate of the partially encased concrete columns subjected to H-shape steel axis force was presented.

对部分包裹混凝土的H型钢轴压柱翼缘板的局部屈曲性能进行了理论分析。

This paper researches the stress distribution on flange slab of prestressed concrete tee beam bridge under the prestressing force,obtains the change laws of maximum and minimum principal stresses of flange slab in the effect of prestressing force,and advances the safety countermeasures for flange slab.

论述了预应力T梁在施加了预应力后翼缘板的应力分布情况,得出翼缘板在预应力作用下的最大、最小主应力的变化规律,并提出了翼缘板的安全对策。

The paper introduced the application of box beam flange slab casting form for special passenger line.

介绍了一种高速客运专线过隧道箱梁翼缘板补浇筑模架,在使用过程中,不影响运梁车的通过,收缩后能安全地穿过隧道,到达另一座桥梁继续工作。

Construction Method of Post-pouring Flange Plate of Simple Box Girder in Passenger Dedicated Line

客运专线简支箱梁后浇翼缘板施工工法

Cracks have been found in the flange and web splices at groove welds in at least four bridges.

至少在四座桥梁的翼缘板和腹板拼接坡口焊缝中发现了裂纹。

The behavior and performance of the cracked flange plates suggest that good levels of fracture toughness exist in the A 517 steel.

开裂的翼缘板的性能及使用状态说明A517钢的断裂韧性良好。

Experiment on Welded Flange Plate (WFP) Reinforced Conneciion

钢结构焊接翼缘板加强式梁柱刚性连接的试验研究

The Manufacturing and Usage of Box Beam Flange Slab Casting Form for Special Passenger Line

高速客运专线过隧道箱梁翼缘板补浇筑模架的研制与使用

According to the relationship between the structural strength and slenderness of plate elements, the limited width-to-thickness ratio of the flange of a box-section column under seismic load is derived.

由构件承载力与壁板宽厚比的关系,得出了抗震设计箱形截面柱翼缘板宽厚比限值。

These include gusset plates welded to the flange.

这些包括焊接到翼缘上的节点板。

The web and flanges of the main girders were fabricated from ASTM A441 steel.

主梁的腹板和翼缘用ASTM A441钢制造。

Small rectangular backup bars were used to fabricate the web-bottom flange connection.

在腹板与下翼缘的施焊中使用小矩形挡板。

Effective Width and Plate-to-Plate Restriction Calculations of Profiled Steel Sheeting

压型钢板翼缘有效宽度及板组约束的研究

Both flange and web exhibited satisfactory elongation characteristics (i.e. 28%).

翼缘和腹板都有令人满意的延伸率（即28％）。

Three structures have exhibited cracking at the ends of flange gusset plates.

已有三个结构在翼缘节点板端部出现了裂纹。

Influences and treatment of the diaphragm structure on flange stress when box beam widening

箱梁拼宽时隔板构造对翼缘应力的影响及处理

Elastic buckling of web restrained by flanges in I-section members

考虑翼缘约束的工字形截面腹板的弹性屈曲

Evaluation of In-plane Stiffness of Corrugated Steel Web with Flange

具有钢翼缘的波形钢腹板的面内刚度计算

The crack surfaces in the web and flange were subjected to visual examination in order to evaluate crack growth regions.

为了估计各裂纹扩展区，对翼缘和腹板的裂纹表面进行了宏观检验。

Elastic Buckling of Web Plates in I-girders under Combined Stresses Considering of the Restriction from the Flange to the Web;

考虑翼缘约束作用的工字梁腹板在复合应力作用下的弹性屈曲

Studies on Plane Stiffness and Bearing Capacity of Composite Structure for Slab on the Lower Flange;

楼板位于钢梁下翼缘的组合结构平面刚度及承载力研究