基本释义:

装载条件

网络释义

1)loading conditions,装载条件

2)intended loading condition,预定装载条件

3)unloading condition,卸载条件

4)loading condition,加载条件

5)load conditions,载荷条件

6)fully loaded transportation condition,重载条件

用法和例句

According to the working mechanism of the normal section rupture of reinforced concrete beams,the effects of reforce on the height of the limited pressurized region of steel-strengthened concrete beams under different unloading conditions(that is,under both the incompletely unloading and completely unloading conditions)are analyzed in the paper,with the differences in the height formulae inferred.

根据钢筋混凝土梁的正截面破坏的作用机理,分析了不同卸荷条件下二次受力对粘钢加固混凝土梁界限相对受压区高度ξb的影响,推导出了再受力情况下(即不完全卸载与完全卸载条件下)ξb公式的差异。

Due to the difference in stress paths between the loading and unloading conditions, it is unsuitable to apply mechanical model under loading condition to stability of tunnel excavation.

由于岩体在加载和卸载条件下应力路径的不同,仅采用加载条件下所建立的力学模型来研究隧道的开挖稳定性问题是不适合的。

Ekonol/POM and Ekonol/G/MoS2/POM composite was prepared by blending-compressing method with torque rheometer,and the friction and wear experiment was used to investigate the tribology characteristics of the POM composite under different loading condition.

用摩擦磨损试验对转矩流变仪-模压成型方法制备的Ekonol/POM和Ekonol/G/MoS2/POM复合材料在不同加载条件下的摩擦学性能进行了研究。

Dynamic modulus(E*) tests are performed on various void volume samples under the conditions of various temperatures and various loading frequencies,which are obtained from asphalt mixtures with Superpave gradation,and the changing regularity of dynamic modulus of asphalt mixtures with the volume parameters and loading condition is analyzed.

对一种Superpave级配沥青混合料不同空隙率的试样进行了不同温度、不同加载频率条件下动态模量试验,分析了混合料动态模量随体积参数、加载条件的变化规律,研究结果对我国的路面设计模量动态参数的选择具有借鉴意义。

The relationships among specimen stress,incident stress,reflected stress and transmitted stress were analyzed;and the loading condition for specimen deformation at constant strain rate was found out,i.

从分析霍布金逊压杆测试中试样变形应力、入射应力、反射应力和透射应力的相互关系入手,获得满足试样恒应变率变形所需的加载条件,即只有当加载应力和试样的变形应力具有相同的变化规律时,试样变形才处于恒应变率状态。

For missile wing,introduce its computation model,load conditions,development plan,test circuit,test results etc.

介绍了弹翼展开装置的计算模型、载荷条件、研制方案、测试电路、试验结果等,在地面模拟确定弹翼展开过程中所需的气动力参数,从而优化了作动筒参数,保证了弹翼的顺利展开。

Study on the Mechanical Properties of Rock Discontinuity under Unloading

结构面在卸载条件下的力学特性研究

C.I.F. landed terms

到岸价格加卸岸条件

Could not uninstall the %1 component. %1 is still required by the following component(s) and cannot be uninstalled until those components are uninstalled: %2

未能卸载 %1 组件。下列组件仍旧需要 %1，在卸载这些组件之前不能卸载: %2

The software for the green software, installation and unloading 100 percent no residue.

本软件为绿色软件，安装卸载100%无残留。

Uninstalling a component removes it from all network connections. Are you sure you want to uninstall %1?

卸载一个组件会将其从所有网络连接上删除。确实要卸载 %1 吗?

Uninstalling a component removes it from all network connections. Are you sure you want to uninstall %1?\0

卸载一个组件会将其从所有网络连接上删除。确实要卸载 %1 吗?\0

Please wait while Setup uninstalls components.

请稍候，安装程序正在卸载组件。

Could not uninstall the %1 component. The error is %2.\0

未能卸载 %1 组件。错误是 %2。\0

A temporary unload file cannot be created or is corrupted.

一个临时卸载文件无法创建或已损坏。

The uninstall files must be save on a local hard drive

卸载文件必须保存在本地硬盘上

The uninstall files must is save on a local hard drive.

卸载文件必须保存在本地硬盘上。

Module Unload: %s.

模块卸载: %s.

A temporary unload file cannot be created or is corrupted.\0

不能创建临时卸载文件或该文件已损坏。\0

Specification for the operation of the swing used in the port cargo handling

GB14736-1993港口装卸用吊环使用技术条件

Specifications for the operation of hook used in the port cargo handling

GB14735-1993港口装卸用吊钩使用技术条件

arrival notice

抵港通知书(声明已具备装卸货条件)

The position of the last crack is marked before unloading the beam.

标出最后一条裂纹的位置，然后卸去载荷。

This method is used to dismount a volume from the file system.

此方法用于将一个卷从此文件系统卸载。