基本释义:

出钢槽

网络释义

1)tapping spout brick,出钢槽

2)spout tapping,出钢槽出钢

3)three trough tapping technique,三槽出钢

4)Monolithic Lander,整体出钢槽

5)arc furnace spout,电弧炉出钢槽

6)Groove steel,槽钢

用法和例句

The tapping spout brick is made up of the seamy side and the surface side.

采用抗浸蚀、冲刷性等优良的机压Al2- O3 MgO- C砖为内衬,振动成型Al2 O3 - C砖为外层的整体组合出钢槽砖,可满足电炉用出钢槽与电炉炉衬同寿命的要求。

This paper based on the theory of Cold Roll Forming for groove steel,discuss the methods for confirming the figures and the dimension for groove steel.

以槽钢辊式冷弯成型理论分析为基础,论述了槽钢辊式冷弯成型的孔型构成及孔型尺寸的确定方法。

Square taper washers for slot section

GB/T853-1988槽钢用方斜垫圈

The Affection of Lateral Channel Stiffner for the Buckling of Stell Beams;

槽钢加劲肋对钢梁整体稳定性的影响

screw nail pointed with slotted heads, of iron or steel

槽头尖端螺钉,铁或钢制

Place cable in groove of cable holder.

在钢索支架槽中放置钢索。

"The medium storage tank includes stainless steel tank, electric mixer, liquid level meter and pump etc."

介质槽有不锈钢槽、电动搅拌器、液位计和泵等。

Steel pipe welding neck flanges with tongue and groove face for PN 1.6MPa (16 bar)

GB/T9115.24-1988PN1.6MPa(16bar)榫槽面对焊钢制管法兰

Steel pipe welding neck flanges with tongue and groove face for PN 15.0MPa (150 bar)

GB/T9115.30-1988PN25.0MPa(250bar)榫槽面对焊钢制管法兰

Steel pipe welding neck flanges with tongue and groove face for PN 4.0MPa (40 bar)

GB/T9115.26-1988PN4.0MPa(40bar)榫槽面对焊钢制管法兰

Steel pipe welding neck flanges with tongue and groove face for PN 5.0MP (50 bar)

GB/T9115.27-1988PN5.0MPa(50bar)榫槽面对焊钢制管法兰

Steel pipe welding neck flanges with tongue and groove face for PN 2.5MPa (25 bar)

GB/T9115.25-1988PN2.5MPa(25bar)榫槽面对焊钢制管法兰

Graver: V-shaped steel cutting tool used by engravers.Also called burin.

雕刻刀:雕刻铜版用的槽形钢刀。

Hubbed slip-on-welding steel pipe flanges with tongue and groove face for PN 1.6MPa (16 bar)

GB/T9116.16-1988PN1.6MPa(16bar)榫槽面带颈平焊钢制管法兰

Hubbed slip-on-welding steel pipe flanges with tongue and groove face for PN 4.0MPa (40 bar)

GB/T9116.18-1988PN4.0MPa(40bar)榫槽面带颈平焊钢制管法兰

Hubbed slip-on-welding steel pipe flanges with tongue and groove face for PN 5.0MPa (50 bar)

GB/T9116.19-1988PN5.0MPa(50bar)榫槽面带颈平焊钢制管法兰

Hubbed slip-on-welding steel pipe flanges with tongue and groove face for PN2.5MPa (25 bar)

GB/T9116.17-1988PN2.5MPa(25bar)榫槽面带颈平焊钢制管法兰

Steel pipe blank flanges with tongue and groove face for PN 1.6MPa (16 bar)

GB/T9123.24-1988PN1.6MPa(16bar)榫槽面钢制管法兰盖

Integral steel pipe flanges with tongue and groove face for PN 10.0MPa (100 bar)

GB/T9113.20-1988PN10.0MPa(100bar)榫槽面整体钢制管法兰

Integral steel pipe flanges with tongue and groove face for PN1.6MPa(16 bar)

GB/T9113.16-1988PN1.6MPa(16bar)榫槽面整体钢制管法兰