基本释义:

布料钟

网络释义

1)distributing bell,布料钟

2)bell-type burden,大钟布料

3)bell less top charging,无料钟布料

4)bell,料钟

5)clock routing,时钟布线

6)bell distributed,钟形分布

用法和例句

The mathematical model of lamellar distribution of furnace burden of bell-type burden in a blast furnace is presented.

提出了高炉大钟布料的炉内炉料层状分布的数学模型,井结合实际生产数据得出两种典型装料制度下的高炉炉料分布的计算结果图形,证明了该模型有较好的适应性。

For increasing the resistance to wear and sealing property between bell and hopper of blast furnace the method overlaid welding a lay of TDGC-1 hard alloy on the matching surface of bell and hopper is used.

为提高料钟、料斗的耐磨性能和密封性能 ,采取了在料钟、料斗结合面上堆焊一层硬质合金 TDGC-1的方法。

Big bell rod happens to fracture accident in No 2 blast furnace of Weihai ironmaking works Through analyzing,it is discovered that the main causes of happening accident are weak equipment management,no attention some abnormal phenomena and no adopting reasonable steps before accident appearance This paper puts forward some effective countermeasures based on the analyzin

威铁２＃ 高炉大料钟杆发生意外断裂事故，分析发现事故发生的原因主要是设备管理力度不够，事故前的反常现象判断不明，措施不当。

This paper proposes a new algorithm for prescribed skew clock routing.

实验结果表明,对使用过时钟偏差调度算法优化后的电路,该算法可在时钟布线阶段有效地减少时钟线网中连线与缓冲器的总电容。

A zero-skew clock routing algorithm with fast clustering and performance improvement is proposed.

介绍了一种基于结群的零偏差时钟布线算法 。

In clock routing,clock signal and clock skew become more and more important for impact of the circuit performance.

在时钟布线中,时钟信号和时钟偏差对电路性能的影响越来越明显。

MATHEMATICAL MODEL OF BURDEN DISTRIBUTION FOR BELL-LESS TOP OF BLAST FURNACE

高炉无料钟布料炉料分布预测模型的开发研究

The Development of the Top Distribution Mathematical Model on Ansteel

鞍钢无料钟布料数学模型研制与应用

The new methods of burden distribution with width burden in a bell-less top blast furnace

高炉无钟炉顶按料流宽度布料新方法

APPLICATION AND DEVELOPMENT OF BELL?LESS TOP?DISTRIBUTOR AT BAOTOU IRON AND STEEL CO.

无钟炉顶布料器在包钢的使用与发展

Automatic control system for N0 3 BF belless top in Meishan Metallurgical Co

梅山3~#高炉无料钟炉顶布料自动控制系统

A SIMULATING STUDY ON BURDEN PROFILES IN BURDEN DISTRIBUION OF BELL-LESS TOP BLAST FURNACE

高炉无钟炉顶布料料面形状的模拟研究

The analysis of partition matrix and width burden in a bell-less top blast furnace

高炉无钟炉顶布料档位划分和料流宽度分析

Measurement of charging trajectory in bell-less top burden of blast furnace and 3-D image reconstruction

高炉无料钟炉顶布料料流轨迹检测与三维图像重建

Burden Distribution Parameters Measurement for Bensteel No.7 BF without Bell Top

本钢7号高炉无钟炉顶布料参数的测定

ON SIMULATION OF CHARGING IN BELL?LESS TOP BLAST ?FURNACE WITH DISTINCT ELEMENT METHOD

离散单元法高炉无钟炉顶布料模拟研究

Research and Improvement of Coke Collapse Simulation in Bell-Less Blast Furnace Burden Distribution Model

无钟布料模型焦炭坍塌数值模拟的研究与创新

When ω=0, equation (69) changes into the stock distribution equation of bell type.

当ω=0时,方程(69)变成料钟型布料方程.

It can stitch sixty meters of fabric per minute.

它每分钟可以缝六十米的布料。

Immerse the cloth in the dye for twenty minutes.

把这块布浸入染料里20分钟。

Control techniques for bell-less top in the new No. 3 BF of WISCO

武钢新3号高炉无料钟炉顶控制技术

Installation of bell-less top steel ring for blast furnace

炼铁高炉无料钟炉顶钢圈的安装技术

Application of BG-Ⅲ Bell-less Top in the Iron-making Plant of Baotou Steel

包钢炼铁厂BG-Ⅲ型无料钟炉顶的应用

bell charging equipment

料钟装料设备(高炉)