基本释义:

迭模浇铸法

网络释义

1)stack pouring,迭模浇铸法

2)copper mold casting method,铜模浇铸法

3)soluble modulus,溶模浇铸

4)copper mold-casting,铜模浇铸

5)pouring mould,浇铸模

6)bottom pour mold,底浇铸模

用法和例句

Al63Cu27Zn10,Al56Cu24Zn20,Al49Cu21Zn30 and Al42Cu18Zn40 bulk metallic glasses(BMGs) have been prepared through a copper mold casting method.

采用铜模浇铸法制备了Al63Cu27Zn10、Al56Cu24Zn20、Al49Cu21Zn30和Al42Cu18Zn40非晶合金。

The samples of several different alloy systems, such as Nd60FexCo30-xAl10,Nd60Fe15Co15-xAl10Nix etc, were prepared by copper mold-casting, special copper mold-casting and melt-spinning.

采用常规铜模浇铸,特殊的铜模浇铸技术及甩带技术分别制备了Nd_(60)Fe_xCo_(30-x)Al_(10),Nd_(60)Fe_(15)Co_(15-x)Al_(10)Nix等体系的直径3-8mm的合金棒及非晶薄带。

Design casting mould and LV mould timely and correctly.

及时、确地设计浇铸模具和LV模具。

I cast the step marks of the victim's ribs.

对受害人肋骨上的痕迹我做了浇铸模型

foliage of glass, cast or moulded

玻璃叶饰,浇铸或模制的

Made by melting and casting in a mold.

铸造的，浇铸的通过在模子里熔化和铸造制成的

How much pouring temperature of EPC should be improved than that of sand mould casting

消失模铸造的浇注温度应比砂型铸造提高多少

Study on The Gating System of Casting Steel by EPC Process

铸钢件消失模铸造浇注系统的试验研究

A Study on the Gating System of Casting Iron by EPC Process

消失模铸造铸铁件浇注系统的试验研究

They are cast in the same mold.

它们是一个模子浇铸成的。

container, asphalt cast or moulded

天然沥青容器,浇铸或模制

The Development Research of Gating System of Die Casting Based on Pro/Engineer

基于Pro/E的压铸模浇注系统开发

Design of Injection Systerm of Lost Foam Casting under Negative Pressure

消失模负压铸造浇注系统设计的探讨

Design of Gating System for Investment Casting Aerospace Components

熔模铸造航空件浇注系统设计和实践

Lost Foam Casting of Burning off Expendable Pattern Under Negative Pressure Before Pouring

负压下先烧失白模再浇注的消失模铸造

MODEL AND ALGORITHM OF CAST PLAN WITH UNKNOWN NUMBER OF CAST FOR STEELMAKING-CONTINUOUS CASTING SCHEDULING

炼钢─连铸对于浇次数未知的最优浇次计划模型与算法

To make a mold of or from(molten metal, for example) before casting.

制模在铸造之前用或从（例如浇铸的金属）制作一个模子

flatten, stretch, or mold metal or glass, by rolling or by pulling it through a die or by stretching.

通过冲模或拉伸来展平浇铸金属或玻璃。

Study on Strength Properties of Phosphate Bonded Core Used in Investment Cast and Formed by Pouring

熔模铸造用浇注成形磷酸盐粘结型芯强度研究

The simulation result is in good agreement to the actual filling process.

实践证明 ,模拟结果同实际浇铸过程比较吻合