基本释义:

非耐热合金

网络释义

1)nonrefractory alloy,非耐热合金

2)heat-resistant alloy,耐热合金

3)Heat Resistant Alloy,耐热合金

4)Heat resistant alloys,耐热合金

5)heat-resisting alloy,耐热合金

6)heat resisting alloy,耐热合金

用法和例句

Performance compares of brazing filler metal of home and abroad used in heat-resistant alloy;

国产耐热合金钎料与进口钎料的性能比较

Effects of different powders on the properties of heat-resistant alloys prepared by metal injection molding;

不同类型粉末对金属注射成形耐热合金性能的影响

Since heat-resistant alloy has the characteristics of heavy ductility,large plasticity,strong adhesion and low grinding efficiency,we propose a novel design philosophy of electrolysis spark mechanical grinding technique.

针对耐热合金韧性塑性大、粘附性强、磨削效率极低的特点,提出了一种新的电解电火花机械磨削复合加工方法设计思想。

Influence of Rare Earth Element on Oxidation Behavior of Casting Fe-Cr-Ni-Al Heat Resistant Alloy;

稀土元素对铸造Fe-Cr-Ni-Al耐热合金抗氧化性能的影响

Vacuum diffusion welding of refractory steel to heat resistant alloy was investigated in this paper.

针对耐热合金与耐热钢的真空感应扩散焊，研究了扩散焊连接工艺参数对接头变形率的影响、接头变形率与接头性能的关系以及不同接头变形率的微观形态。

Different amounts of mixed rare-earth(RE) metals were added in Fe-Cr-Ni heat-resisting alloy.

在Ｆｅ－Ｃｒ－Ｎｉ奥氏体耐热合金中加入不同量的混合稀土元素，在１０５０℃时进行持久试验。

The vacuum diffusion bonding between K5 heat-resisting alloy and 2Cr12NiWMoV heat-resisting steel was studied,and the effects of the welding parameter T,P and also the interlayer thickness on the microstructure and properties of the joint were investigated.

本文通过Ｋ５耐热合金与２Ｃｒ１２ＮｉＷＭｏＶ耐热钢的真空扩散连接，研究了焊接工艺参数Ｔ、Ｐ、ｔ及中间层厚度对接头组织与性能的影响规律。

Relationship between the elastic-plastic deformation at the notch root of heat resisting alloy specimen under 450℃ and the fatigue cycle was studied based on digital speckle correlation technique.

应用数字散斑相关技术研究了耐热合金试件在450°环境中缺口根部的弹塑性变形及其与疲劳循环次数的相关性。

Experiment Research on the Structure and Properties of Heat Resistance Alloy Ductile Iron

耐热合金球墨铸铁组织和耐热性能的试验研究

Haynes 25 alloy

海纳25钴铬钨镍耐热合金

The Experimental Research on Brazing Process of Fe_3Al and High Temperature Heat-resistant Alloy

Fe_3Al与高温耐热合金的钎焊性能研究

Microstructure and Properties of Heat- and Wear-resistant Al-Si Alloy Prepared by Spray Deposition;

喷射沉积Al-Si系耐热耐磨合金的组织及性能

Study on the Microstructure and Properties of a Special Low-Alloy Steel with Wear-Heat Resistance;

特种低合金耐磨耐热钢组织和性能的研究

Microstructures and Properties of Aluminum Alloy with Heat- and Wear-Resistance Prepared by Spray Forming;

喷射沉积耐热耐磨铝合金的组织和性能研究

Potential development tendencies and research directions about heat-resistant magnesium alloys are proposed.

最后指出发展耐热镁合金的主要方向。

The Microstructure and Properties of Mg-4Al-RE-Ca-Si Heat-resistant Magnesium Alloys;

Mg-4Al-RE-Ca-Si耐热镁合金的组织与性能

The Study on Heat Treatment Technology of 55Cr5SiMoVNi Abrasive Cast Steel;

55Cr5SiMoVNi耐磨合金铸钢热处理工艺的研究

The Study of Casting Magnesium Alloy GYZ103 with High Strength and Heat Resistance;

GYZ103高强耐热铸造镁合金的研究

The Microstructures and Mechanical Properties of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy

喷射沉积耐热高硅铝合金组织及性能

The Research of the Heat Treatment of the Low-alloy High Strength Steel

低合金高强度耐磨钢热处理工艺研究

Development of Alkaline-earth and Heat-resistent AM80-Ca-Sr Magnesium Alloys

AM80-Ca-Sr碱土耐热镁合金研究

Tribological Characteristics of Heat Resistant Magnesium Alloy AZE and AS41

AZE和AS41耐热镁合金的摩擦学行为研究

Study on High Strength Heat-Resistant Al-Si Piston Alloys

高强耐热Al-Si活塞合金的研究

Formation and properties of low expansive and heat-resistant aluminum alloy with high silicon content

耐热低膨胀高硅铝合金的成形与性能

Corrosion-resistant Properties of Hot-dip Galvannealed Steel Sheets

热镀锌合金化钢板的耐腐蚀性能研究

A Study on Hot Workability of Corrosion Resistance Alloy G3,G3-Z and 825

耐蚀合金G3、G3-Z和825热加工性的研究