基本释义:

固化常数

网络释义

1)solidification constant,固化常数

2)solid solution hardening constant,固溶体硬化常数

3)intrinsic constant,固有常数

4)ambient cure,常温固化

5)room temperature curing,常温固化

6)ambient curing,常温固化

用法和例句

A new kind of nonstick coating which can be ambient cured was developed and introduced,(PTFE) and sl-619 were added into mixed solvent,and get suspension liquid after fully scattering,in addition go into FEVE and addition agent mixed,then can get nonstick.

将聚四氟乙烯(PTFE)超细粉和分散助剂sl-619加入脂类混合溶剂中充分分散,得到悬浊液;加入FEVE树脂和助剂,均匀混合后,就得到可在常温固化的不粘涂料。

This kind of ambient cure FEVE paint has excellent physical and mechanical properties,and can be applied widely in anti-corrosion engineering, architecture field,etc.

通过对常温固化用固化剂类型、用量及其它助剂对涂料、涂层性能影响的综合分析,研制了一种常温固化溶剂型聚三氟氯乙烯(FEVE)涂料。

This paper introduces the characteristics of acrylates in chemistry reactions and the compositions,the applications and the current research progress of room temperature curing acrylate adhesives,which include the first,second and third generation acrylates adhesives,acrylic anaerobic adhesive,acrylic pressure sensitive adhesive and α-cyanoacrylate adhesive.

分析了丙烯酸酯的反应特点,介绍了第一、二、三代丙烯酸酯胶粘剂、丙烯酸酯厌氧胶粘剂、丙烯酸压敏胶粘剂以及α-氰基丙烯酸酯胶粘剂这几种常温固化丙烯酸酯胶粘剂的组分、应用及其研究进展。

A high temperature resistant coating is developed which is composed of epoxy organosilicon resin, nano-filler and room temperature curing agent.

以环氧树脂化学改性有机硅树脂为基体材料,纳米粒子为填料并采用了常温固化体系,研制了耐高温防护涂层。

Study on high temperature resistance adhesive for room temperature curing;

实验结果表明,该胶粘剂可常温固化,加固后的构件可在常温与高温(150℃)环境中长期使用;该胶粘剂在150℃时的剪切强度为17。

Development and Study on Ambient Curable Non-stick Coating;

常温固化不粘涂料的研制与性能研究

Room Temperature Preparation of the Self-cleaning Nano-TiO_2 Thin Film;

常温固化纳米TiO_2自清洁薄膜的制备

Development and Application of Ambient Cured Anti-corrosion Fluorocarbon Coatings

常温固化防腐蚀氟涂层的研制及应用

Study on Thermal Stability of Air Curing FEVE Coatings

常温固化FEVE氟碳涂料热稳定性研究

Study on Surface Hydrophilicity of Ambient Cure FEVE Fluorocarbon Coatings Film

常温固化FEVE氟碳涂膜表面亲水性研究

Study on Mechanical Properties of Air Curing FEVE Paint

常温固化FEVE氟碳涂料力学性能研究

Development of Room Temperature Curing Epoxy Resin Modified Silicone Heat-resistant Coating

常温固化环氧改性有机硅耐高温涂料的研制

Contrast Study on Properties of Three Type Air Curing Fluorocarbon Coatings

三种常温固化氟碳涂料性能的对比研究

Curing Shrinkage and Warpage Deformation of Composite Thin Laminates at Room Temperature

复合材料薄层板常温固化收缩及翘曲变形

Study on the Structure,Properties and Modification of Air-curing FEVE Coatings

常温固化FEVE氟碳涂料结构、性能及改性研究

Study on weather resistance of air-cured FEVE paints in different districts

常温固化FEVE氟碳涂料耐候性地区差异研究

Development of Ambient-Curable High-Temperature Organosilicone/Polyurethane Paint and Study on Its Performance

常温固化有机硅/聚氨酯耐高温涂料的制备及性能研究

THE STUDY ON THE INFLUENCE OF SULFURING TO ABRADABILITY OF MUCOUS SYNOVIAL MEMBRANE SOLIDEN AT ROOM TEMPERATURE

渗硫处理对常温固化粘结润滑膜耐磨性影响的研究

Studies on Cathodic Disbondment of Base Coatings for Ambient Curable Fluoro-carbon Coating;

常温固化含氟涂料配套底涂料耐阴极剥离性能的研究

Study on Structures and Properties of Air Curing Feve Paints and Preparation of High-Performance Feve Paints

常温固化FEVE氟碳涂料结构与性能研究及高性能FEVE氟碳涂料的制备

Preparation and Property of Normal-Temperature Solidified and Non-Sintered Foam Ceramic Composites

常温固化免烧结泡沫陶瓷复合材料的制备及性能

An Anticorrosive and Weatherproof Top Coat upon Normal Temperature Solidification with Two Silane Polymers

两种硅烷聚合物制造的常温固化防腐耐候水性工业面涂

Anticorrosive coating accessory system and construction quality control of air-curable fluorocarbon paints-part two

常温固化氟碳涂料防腐涂层配套体系及施工质量控制(二)