基本释义:

柯麦雷尔弯曲试验

网络释义

1)Kommerell bead bend test,柯麦雷尔弯曲试验

2)Kinzel test,肯泽尔弯曲试验

3)bend test,弯曲试验

4)bending test,弯曲试验

5)Bending experiment,弯曲试验

6)flexural test,弯曲试验

用法和例句

The roasting test and bend test results .

烘烤试验及弯曲试验表明,该工艺结合力很好。

This paper firstly expatiates the object and purpose of the bend test during the welding procedure qualification.

通过对焊接工艺评定中弯曲试验评定对象和目的的阐述 ,结合国内外的焊接工艺评定标准对弯曲试验的不同要求 ,对焊接接头弯曲试验的力学模型进行了数学分析 ,得出采用不同弯曲试验标准可以得到不同的评定结果。

Through the comparison between the outdated and the lastest standards it is found that althongh the years for preparation of two standards are different,bath for equivalent to the international standard ISO 7438:1985 “metallic materials-bend test” the definite answer has not found out for some questions.

通过新旧标准对比 ,发现两个标准虽然年代不同 ,但均等放采用国际标准ISO 7438:1985金属材料—弯曲试验 ,其中某些问题尚找不出确切的答案。

Metal material bending test is an important item when raw materials come to factory in boiler and pressure vessel manufacturing trade.

金属材料的弯曲试验是锅炉压力容器制造行业进行原材料入厂检验的一项主要检查项目。

Low-temperature bending tests of asphalt mixture under-10℃ have been done by MTS810 material test system.

在MTS810材料试验系统上进行了-10℃下的沥青混合料的低温弯曲试验,通过对大量试验结果的分析和总结,以抗弯拉强度和最大弯拉应变为指标来评价沥青混合料的低温抗裂性能。

In order to promote the industrialization of the FRP fishing boat, the writers consulted a lot of material in our country and abroad, conduct ed bending tests for some slices of FRP ship s bulk, and then bring forward rule s for this kind of test.

为推进玻璃钢渔船 的产业化进程，作者在查阅了大量国内外有关资料的基础上，进行了玻璃钢渔船船体材料切 片的弯曲试验，最终提出了我国玻璃钢渔船船体材料切片的弯曲试验的试验规程，以供我国 今后制定玻璃钢渔船材料试验标准作参考。

Research on the Bending Experiment Method on Copper and Cuprum Alloy Contact Wires for Electrified Railways;

电气化铁道用铜及铜合金接触线反复弯曲试验方法的研究

Bending experimented test system of piston rod based on virtual instruments

基于虚拟仪器的活塞杆弯曲试验测试系统

Several experiment methods on the adhesion property between CFRP and concrete are studied and analyzed,of these methods,bending experiment method is easy and very effective.

本文分析了研究CFRP与混凝土之间粘结性能的几种试验方法 ,确定采用简单易行而且十分有效的弯曲试验来研究CFRP加固混凝土结构粘结材料的性能。

By flexural test and split test , the effect of part or total replacement of mineral powder with cement on and-cracking performance of asphalt mixture is researched.

通过弯曲试验和劈裂试验,分析了水泥替代部分或全部矿粉对沥青混合料抗裂性能的影响。

alternative wrap around guided-bend test

交变缠绕定向弯曲试验

flexing ozone weather testing chamber

臭氧腐蚀弯曲试验箱

Test methods for bare wires--Bend test--Single bend test

GB/T4909.6-1985裸电线试验方法弯曲试验单向弯曲

Test methods for bare wires--Bend test--Reverse bend test

GB/T4909.5-1985裸电线试验方法弯曲试验反复弯曲

Methods of test for enamelled wires--Mandrel winding test for rectangular wires

GB/T4074.7-1983漆包线试验方法扁线弯曲试验

Covered wires--Method for mandrel winding test of rectangular wires

GB/T1343.6-1984绕包线扁线弯曲试验方法

Bend test for coating (conical mandrel)

GB/T11185-1989漆膜弯曲试验(锥形轴)

Bend test for coating (cylindrical mandrel)

GB/T6742-1986漆膜弯曲试验(圆柱轴)

Metallic materials--Tube--Bend test

GB/T244-1997金属管弯曲试验方法

Metallic materials--Bend test

GB/T232-1988金属弯曲试验方法

Test method for specific thermal deflection of thermostat metals

GB/T8364-1987热双金属比弯曲试验方法

testing method for flexing endurance of light leathers and their surface finishes

皮革耐弯曲性试验方法

testing method for flexural creep of plastics

塑料弯曲蠕变试验法

rotary bending tester

旋转弯曲疲劳试验机

rotating bending fatigue machine

回转弯曲疲劳试验机

reversed bending fatigue machine

反复弯曲疲劳试验机

Plastics--Determination of flexural properties by use of small specimens

GB/T16419-1996塑料弯曲性能小试样试验方法

Research on the Curves Versus Moment Hysteretic Behavior of Thin-walled Cold-formed Steel Beams

冷弯薄壁型钢梁的弯矩-曲率滞回性能试验研究