基本释义:

接触反应钎焊

网络释义

1)contact reactive brazing,接触反应钎焊

2)Contact Reaction Brazing (CRB),接触反应钎焊试验研究

3)resonance brazing,接触钎焊

4)reaction brazing,反应钎焊

5)reactive composite-brazing,反应-复合钎焊

6)contact reaction,接触反应

用法和例句

Experimental study on LD30 aluminum contact reactive brazing;

LD30铝合金接触反应钎焊的试验研究

A new technology for contact reactive brazing of aluminum to stainless steel in composite electro-thermal cooker;

复合电热餐具铝/不锈钢接触反应钎焊新技术

Test of 6063 Al alloy contact reactive brazing has been conducted in the case of special brazing parameters,using Cu foil and Cu foil-Mg power-Cu foil as reaction layer material,the microstructure and grain boundary penetration phenomena were analyzed and discussed primarily.

采用Cu箔及Cu箔-Mg粉-Cu箔作为反应层材料,在特定的工艺参数条件下,对6063铝合金进行了真空接触反应钎焊试验,初步分析探讨了钎缝微观组织结构和晶界渗透现象。

Resolve of fragile and defect problem for a new contact reaction brazing aluminum to stainless steel;

为满足不锈钢电加热餐具生产的需要,提出采用接触反应钎焊的方法实现复合电热餐具的铝热管与铝板、铝板与不锈钢板结构的高致密连接。

The results show that both the process parameters and the assemblage geometries of the specimens will affect the microstructures and the growth of the Ti-Fe compound,when Ti is placed above Fe or Ti/Fe couple is placed upright,the contact reaction zone is consist of β-Ti(Fe)solid soution,coarse TiFe compound,Ti-Fe eutectic structure and Fe.

在不同的工艺参数和不同的试样摆放方式下,使用纯Ti和纯Fe进行了接触反应试验,就Ti/Fe接触反应区微观组织和Ti-Fe化合物的生长规律进行了初步研究。

Contact reactive brazing between Al alloy/Cu/stainless steel and analysis on grain boundary penetration behaviors

铝合金/铜/不锈钢接触反应钎焊及晶界渗透行为分析

Transient Contact Liquid-Solid Reaction of Solder Droplet/Pad and Interfacial Microstructure Evolution;

钎料熔滴/焊盘瞬间接触液固反应及界面组织演变

Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;

Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究

Interfacial reaction of active brazing between Al_2O_3 ceramic and metal Ni

Al_2O_3陶瓷与金属Ni活性钎焊界面反应

Research on the Liquid Structure of Lead-free Solders and the Interfacial Reaction during Soldering and Their Correlation;

无铅钎料的液态结构与钎焊界面反应及其相关性研究

Interfacial reaction between solder alloys and metallization during laser solder bonding process for optical fiber alignment

光纤定位激光钎焊键合过程中钎料与镀层的界面反应

The Research of Brazing Application for Measuring Installation of Fast Neutron Experimentation Reactor;

快中子实验反应堆测控装置钎焊技术研究

Interfacial Reactions and Alignment for Fiber Bonding by Laser Soldering;

光纤激光钎焊键合过程中界面反应及对准研究

The Study on Reactive Wettability of SnAgCu Solder Alloy on Au/NiFe/Cu PAD

SnAgCu钎料合金在Au/NiFe/Cu焊盘上的反应润湿研究

Reaction mechanism and microstructure of interface in soldered joint of zinc-based alloy

锌基合金钎焊界面区的反应机制及组织结构

A Study of Residual Stress of the Brazing Joint between Cemented Carbide and Steel;

硬质合金与钢钎焊接头的残余应力研究

Application of Main Transformer Terminal Phosphorized Copper Cast Brazing Technique

浅谈主变接线柱磷铜浇铸钎焊技术的应用

Finite element simulation of thermal stress on brazed K24 nickel-based joint

K24镍基合金钎焊接头热应力的有限元模拟

This paper introduces the connection using the brazing technique, selects corresponding brazing filler metal and flux together with proper technology, and determines the techniques and measures.

介绍了采用钎焊的方法进行连接;选择了相应的钎料与钎剂;并确定了工艺及措施。

Bonding process of pure copper with amorphous Cu-P interlayer

非晶Cu-P钎料钎焊接头形成过程

The Application of the Ultrasonic Detection System in the Contact Brazing Quality Control and Improvement

超声波探伤系统在触头钎焊质量控制与改进中的应用

Technical specification for welding copper and copper alloys

铜及铜合金焊接及钎焊技术规程

Study on Weldability and Microstructure of Brazing Cubic Boron Nitride;

钎焊立方氮化硼的焊接性与微观结构