基本释义:

精密包模铸造法

网络释义

1)precision investment casting,精密包模铸造法

2)precision casting,精密铸造法

3)investment casting,包模铸造法

4)investment casting,熔模精密铸造

5)precision casting,熔模精密铸造

6)EPS pattern precision casting,EPS模精密铸造

用法和例句

Ring Nozzle in Investment Casting;

环形喷嘴的熔模精密铸造

Shellmould Fabrication for the Investment Casting of Titanium Aluminides;

TiAl基合金熔模精密铸造用型壳制备工艺研究

Adding Al before tapping,the lathe tool is produced by investment casting with W18Cr4V scrap inthe intermediate frequency induction furnace.

将W18Cr4V高速钢废料，采用中频感应炉熔炼，出钢前加Al，熔模精密铸造车刀刀具，经淬火和四次回火后，硬度达HRC64。

In this paper the development and study status of precision casting for the large-thin wall-complex titanium alloys casts are introduced in the aspects of melting, precision casting and defect detecting.

从钛合金的熔炼、熔模精密铸造技术、钛合金铸造缺陷及检测方面介绍了大型复杂薄壁钛合金铸件精铸技术,大型复杂薄壁钛合金铸件的发展和应用现状,以及相关的铸造技术和充型过程数值模拟的应用,并提出了大型复杂薄壁钛合金铸件熔模精密铸造的发展趋势。

The precision casting technology of steel cable fixtures made of 1Cr18Ni9 stainless steel is presented in this paper.

介绍一种碳钢钢丝绳夹座树脂砂铸造 ,改用 1Cr18Ni9材质的熔模精密铸造工

Shellmould Fabrication for the Investment Casting of Titanium Aluminides;

TiAl基合金熔模精密铸造用型壳制备工艺研究

Development and Research Status of Investment Casting TiAl-Based Alloys

TiAl基合金熔模精密铸造技术的发展现状

Study on Technology of Investment Cast for Titanium Alloy Using Low Cost Oxide Ceramic Mould Shell;

钛合金低成本氧化物陶瓷型壳熔模精密铸造技术研究

A new filtration technique for purification of carbon, stainless, high speed, low and high alloy steel castings in investment casting was investigated.

研究了在熔模精密铸造中过滤净化碳钢、低合金钢和高合金钢等铸钢件的过滤新技术。

The effect of different pattern materials on accuracy of casting MOD inlay

熔模材料对铸造嵌体精度的影响研究

It is an ideal material for precision casting of Carbon Steel, Stainless Steel, Rrefractory Steel as well as moudle of Alumina Alloy and Titatium Alloy.

是碳素钢、锈钢，耐热钢等复杂精密铸件和铝，钛合金熔模铸造的理想原料。

The Effect of Different Pattern Materials on Accuracy of Casting MOD Inlay;

不同熔模材料对铸造嵌体精度的影响研究

non-ferrous precise casting technology of gypsum model

石膏模非铁金属精密铸造技术

Study and Application of Hot Work Die Precision Casting Process

热锻模具精密铸造工艺的研究与应用

Basic Research on Precision Casting Technology of Cr12MoV Mold Part

Cr12MoV模块精密铸造技术基础研究

Research and Application of the Mold Shell Baker Used in the Precision Casting Line

精密铸造模壳焙烧生产线的研制应用

To make(objects)by pouring molten material into a mold.

铸造将（熔化物）注入铸模，得到铸件

Made by melting and casting in a mold.

铸造的，浇铸的通过在模子里熔化和铸造制成的

Yuyao No.2 Precision Casting Factory

余姚市精密铸造二厂

Magnesium Alloy Precision Die-casting and Mould Design & Manufacture;

镁合金精密压铸成形工艺及模具设计制造

The Design and Research of Silicon Rubber Mould Centrifugal Rotary Casting Machine;

硅橡胶模精密离心旋转铸造机的设计与开发

Numerical Simulation of the Casting Process of Titanium Denture Frameworks;

纯钛义齿支架精密铸造过程的数值模拟

Numerical Simulation of Solidification Structure of Ti Alloy during Vertical Centrifugal Casting;

钛合金立式离心精密铸造凝固组织数值模拟