基本释义:

离心浇铸机

网络释义

1)centrifugal casting machines,离心浇铸机

2)centrifugal casting machine,离心浇铸机

3)centrifugal caster,离心浇铸机

4)centrifugal casting machine,离心式浇铸机

5)Centrifugal casting,离心浇铸

6)spun pipe,离心浇铸管

用法和例句

Monitoring System of Centrifugal Casting Machines Based on Frequency Conversion Technology;

基于变频技术的离心浇铸机监控系统

The hardware system structure and main functions of monitoring system of centrifugal casting machines based on inverter technology were introduced.

离心浇铸机两驱动辊在运行过程中既要保持同步,又要保证两台电机的负荷平衡。

Based on the analysis of the kinetic mechanism for development of cracking of the nodular heavy-wall tube cast with the centrifugal casting machine,the influence by the casting operation speed on the quality of the tube as cast is discussed.

通过分析立式离心浇铸机浇铸球墨铸铁厚壁管的裂纹形成的动力学机理,阐述了铸型的工作转速对离心铸管质量的影响,研讨直流调速系统在离心铸造电气控制中的适用性及在实际应用中的技术问题。

The centrifugal caster is unstable in the production and the contact surface of bearing and the head suffers alloy tear and uneven accumulation,and the speeds at the two ends of the bearing do not match.

针对国内大型轧机油膜轴承离心浇铸机生产质量不稳定,轴承和顶头接触面发生合金撕裂、堆积不均匀等现象,以及轴承两端速度不匹配等问题,分析了单端模拟调速驱动和分离加热工艺对浇铸质量的影响;提出全新的双驱动变频调速、自动加热炉和自动加料相结合的单套完整设备方案;摒弃原有的模拟量调速,采用高精度的现场总线技术及控制策略实现两台电机的精确同步;增加自动加热炉和自动加料装置减少了浇铸过程中热能的损失,改进了浇铸工艺,提高了产品浇铸质量。

Determination of chromium, silicon, phosphorus in ferrochrome by X-ray fluoresence spectrometry using sample preparation technique of centrifugal casting;

离心浇铸制样X射线荧光光谱测定铬铁中铬、硅、磷

Study on preparing the spectral type standard sample by centrifugal casting;

离心浇铸法制备光谱控制样的分析研究

Determination of manganese,silicon,phosphorus in ferromanganese by X-ray fluorescence spectrometry with centrifugal casting preparation of sample;

离心浇铸制样-X-射线荧光光谱法测定锰铁中锰硅磷

Control Strategy Analysis and Application of Improvement after the Film Bearing for Mills of Centrifugal Caster

一种改进的油膜轴承离心浇铸机及其控制策略分析与应用

Application of Centrifugally Cast Filled Glass Fiber Reinforced Unsaturated Ployester Resin Pipe in Pipe Tacking

离心浇铸玻璃钢夹砂管在顶管工程中的应用

The Method for Calculating the Strength of Centrifugally Cast Fibre Composites

离心浇铸纤维复合材料的强度计算方法

INVESTIGATION OF THE MECHANICAL PROPERTIES OF CENTRIFIGALLY CAST DISCONTINUOUS FIBRE REINFORCED PLASTICS

离心浇铸纤维复合材料基本力学性能的研究

Improvement on Design of Centrifugal Casting Equipment for Ductile Cast Iron Pipe

球墨铸铁管离心浇注工艺装备的改进设计

STUDY ON QUALITY IMPROVEMENT OF CENTRIFUGAL CAST BABBIT METAL

提高离心浇铸巴氏合金轴瓦质量的研究

Our typical applications includes: Furnace tilt drives and bull gear arrangements, Main ladle hoists and travel drives, Roller table drives, edger rolls, Rolling mill pinion stands and reducers, Drives for coilers, uncoilers, edgers, shears etc.

应用在连续性浇铸机、道上的行星齿轮减速机，另外还有用在离心式除凝泵的高速齿轮箱。

horizontal arm hanging type centrifugal casting machine

悬臂卧式离心铸造机

Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster

圆坯连铸机浇铸20钢铸坯的生产实践

DETERMINATION OF Si,Mn,P,Ti IN CENTRIFUGAL CASTED IRON SAMPLE WITH X-RAY FLUORESCENT SPECTRUM ANALYSIS

X射线荧光光谱分析离心浇铸制样生铁中的Si、Mn、P、Ti

XRFS Determination of Molybdenum,Silicon,Phosphorus and Copper in Ferromolybdenum with Samples Prepared by Centrifugal Casting

离心浇铸制样-X射线荧光光谱法测定钼铁中钼硅磷铜

Determination of niobium,silicon and phosphorus in ferrocolumbium by X-ray fluorescence spectrometry using sample preparation technique of centrifugal casting

离心浇铸制样-X-射线荧光光谱法测定铌铁合金中铌硅磷

Discussion about Design of the Gating System in the Centrifugal Casting Process with Silicone Rubber Mould

低熔点合金饰品硅橡胶型离心铸造浇注系统的设置探讨

casting machine, used in metallurgy and in metal foundries

冶金及金属铸造用浇铸机

casting machine for pressure casting (excl. for sintering)

压力铸造式浇铸机（用于烧结的除外）

Centrifugal Casting of Cylinder Liner of Air Compressor Used for Mine Electric Locomotive

矿用电力机车空压机缸套的离心铸造

centrifugally cast pipe

离心浇灌钢筋混凝土管

Casting the propellant is done through the "bayonets" from the casting pot to the case.

推进剂的浇铸是通过从浇铸锅到发动机壳体的“插管”来进行的。