基本释义:

拉模盒

网络释义

1)die box,拉模盒

2)square cup deep-drawing,方盒拉深

3)Faraday cage,法拉第盒

4)rectangular drawpiece,盒形拉深件

5)square-cup deep drawing,方盒件拉深

6)rectangular case drawing,矩形盒拉深

用法和例句

By studying the present calculating formula of rectangular drawpiece blank size, this paper gains the major reason of inducting error,and obtains new more accurate formula,according to the same principal that surface area is equal before and after drawing.

对现有盒形拉深件坯料尺寸计算公式进行了分析 ,得出其误差存在的原因 ,并根据“坯料面积与拉深件面积相等”的原则得出了较为准确的盒形拉深件坯料尺寸计算新公式。

The forming limits in non-axisymmetric square-cup deep drawing of aluminum alloy LF21, LY21(M) and steel st17 are predicted by means of the ductile fracture criterion (DFC) advanced by the author.

利用作者提出的韧性断裂准则预测了铝合金板LF21,LY21(M)和钢板st17非轴对称的方盒件拉深成形极限,并与成形极限图的预测结果和实验结果进行比较。

Analysis of flange corner deformation in the process of fine copper sheet rectangular case drawing;

纯铜薄板矩形盒拉深中法兰曲边的变形分析

Experiment and numerical analysis of blank shape s effect on pure copper sheet metal rectangular case drawing;

切角板坯对纯铜薄板矩形盒拉深影响的试验及数值分析

Calculating case form dimension of drawing with similarity principle;

用相似原理计算盒形拉深件展开尺寸

Research on blank shape and drawing process of asymmetric box part

非对称盒形工件拉深毛坯与成形设计

Forming limit and weld seam movement of TWBs with different thicknesses in square cup

差厚拼焊板拉深方盒形件成形极限及焊缝移动

Research on the Key Technologies of Intelligent Deep Drawing Control for a Rectangular Box;

盒形件拉深智能化控制关键技术的研究

Analysis and Control of Drawing Springback of Box Part Based on FEM;

基于有限元法的盒形件拉深回弹分析及其控制

SIMULATION AND ANALYSIS ON WRINKLING BEHAVIOR OF SQUARE BOX PART IN DEEP DRAWING BASED ON DYNAFORM

基于Dynaform的方盒形件拉深起皱情况模拟分析

Real Time Prediction of BHF Control Law in Intelligent Deep Drawing for Rectangular Box

盒形件智能化拉深压边力规律的实时预测

Finite element analysis of the box flowability during viscous medium drawing

盒形件粘性介质拉深过程流动性的有限元分析

Study on liquid pressure loading paths of square cup in Hydro-mechanical deep drawing without draw die

盒形件无模充液拉深液压加载路径的研究

Parameters identification of material properties in intelligent rectangular box deep drawing

盒形件智能化拉深过程中材料性能参数的识别

Numerical Simulation of Process of Square Cup Drawing Using Tailor Welded Blanks in Hydro-mechanical Deep Drawing Without Draw Die

拼焊板盒形件无模充液拉深工艺及数值模拟

Study and Real Time Predication of BHF Control Law in Intelligent Deep Drawing for a Rectangular Box;

盒形件智能化拉深压边力控制规律的研究和实时预测

Study on the Welded-line Movement of Square Cup Using TWBs in Hydro-forming Deep Drawing

差厚拼焊板方盒形件充液拉深中焊缝移动的研究

The Cause Analysis and Solution of the Wrinkle during Drawing for Thin-wall Box Container Parts

薄壁盒形容器零件拉深起皱的原因分析与解决方法

Research on Multistage Deep Drawing and Ironing of an Irregular Cup

异形盒多道次深拉深有限元仿真与试验研究

Numerical Simulation and Process Optimization of Drawing of Rectangular Automobile Panel;

盒形覆盖件拉延成形数值模拟及工艺参数优化

Numerical simulation of cup drawing based on drawing-hole forming technology

基于拉深孔成形技术的杯形件拉深数值模拟

The Research on the Drawing of FVS0812 Hemisphere-shaped Workpiece;

FVS0812薄板半球形零件拉深成形研究