基本释义:

离心连铸

网络释义

1)centrifugal continuous casting,离心连铸

2)centrifugal casting,离心铸造

3)centrifugal cast,离心铸造

4)centrifugal infiltrating casting,离心渗铸

5)Centrifugal casting,离心浇铸

6)centrifugally cast pipe,离心铸管

用法和例句

Wear-resistance of Metallic Mold Centrifugal Casting TiAl Based Alloy;

金属型离心铸造TiAl基合金耐磨性研究

In this paper,low-hardness high chromium roll was produced by means of designing reasonable centrifugal casting process and heat treatment method.

概括介绍了太钢轧辊公司利用5t中频炉、卧式工频炉、卧式离心机、低温电加热处理炉等设备,通过制订合理的离心铸造工艺和热处理工艺生产低硬度高铬铸铁轧辊,同时与热连轧磨辊间制订合理的磨削制度,满足了太钢热连轧的轧钢使用要求。

The SiCp/Al alloy matrix composite was obtained through a new type of methodelectromagnetic centrifugal cast.

采用一种新型的工艺制备ＳｉＣ_Ｐ／Ａｌ合金基复合材料，即在传统离心铸造工艺条件下引入稳恒直流磁场，利用工艺中的电磁搅拌作用使离心铸造复合材料的偏聚情况得以改善，并探讨了稳直流磁场对颗粒分布均匀性的作用机理。

Based on rapid prototyping technology the silicon rubber mold for centrifugal casting is conveniently made.

采用快速原型技术 ,可以方便地制造硅橡胶离心铸造模 ,适用于生产外形复杂的低熔点合金微小铸件。

Determination of chromium, silicon, phosphorus in ferrochrome by X-ray fluoresence spectrometry using sample preparation technique of centrifugal casting;

离心浇铸制样X射线荧光光谱测定铬铁中铬、硅、磷

Study on preparing the spectral type standard sample by centrifugal casting;

离心浇铸法制备光谱控制样的分析研究

Determination of manganese,silicon,phosphorus in ferromanganese by X-ray fluorescence spectrometry with centrifugal casting preparation of sample;

离心浇铸制样-X-射线荧光光谱法测定锰铁中锰硅磷

The different processes used to make faucet cores for centrifugally cast pipes production as well as their advantages and shortages was described in detail,and compared from different angles.

详细叙述了生产离心铸管承口芯的不同工艺方法及其优缺点,并从不同角度加以对比。

centrifugal casting pipe for stay bolt

贯穿螺栓离心铸造管

high frequency auto centrifugal casting furnace

高频自动离心铸造炉

horizontal arm hanging type centrifugal casting machine

悬臂卧式离心铸造机

Arsenal process

阿塞诺炮筒离心铸造法

Centrifugal casting ductile iron pipe

GB/T13295-1991离心铸造球墨铸铁管

An Example of Recovery of Coated Die for Centrifugal Cast Small-Bore Pipes

涂料金属型离心铸造小口径管铸型再生一例

Solidified Structure Simulation of the Titanium Castings Made by Vertical Centrifugal Casting

钛合金铸件立式离心铸造凝固组织数值模拟

Microstructure of WC /steel matrix composites prepared by centrifugal casting

离心铸造WC/钢复合材料显微组织

Centrifugal Casting of Cylinder Liner of Air Compressor Used for Mine Electric Locomotive

矿用电力机车空压机缸套的离心铸造

Production Process of Centrifugally Cast High Speed Steel-Nodular Iron Composite Roller

离心铸造高速钢—球铁复合轧辊的制造工艺

Electromagnetic Centrifugal Casting of Al_2O_3 Fibre Enforced Cast Iron Matrix Composites;

电磁离心铸造Al_2O_3纤维/铸铁复合材料的制备与研究

INFLUENCE OF Cr,As ON METALLOGRAPHIC STRUCTURE OF WATER-COOLED METAL-TYPE CENTRIFUGAL CASTING NODULAR-CAST-IRON PIPE

Cr、As对水冷金属型离心铸造球墨铸铁管金相组织的影响

Technical Study of In-Situ Primary Si and Mg_2Si Particles Reinforced Al Based Composite Tubes in Centrifugal Casting

离心铸造自生初晶Si、Mg_2Si颗粒增强Al基复合材料铸件工艺研究

Neck Shrinkage Control of Composite Rollers with Nodular Iron as Core Material

离心铸造球铁芯复合轧辊辊颈缩松的控制

Study on Pre_Processing and Post-processing Software Used for Solidification Simulation of Double-metal Composite Pipe Made by Centrifuge Casting;

离心铸造双金属复合管凝固模拟前后处理研究

Formation and Evolution of Defect during the Vertical Centrifugal Casting of Titanium Alloy

钛合金立式离心铸造缺陷形成与演化规律

Prediction of Shrinkage Cavity and Porosity in Centrifugal Cast Rollers by Niyama Criterion

利用Niyama判据预测离心铸造轧辊缩孔缩松缺陷

Microstructure and Property of High-strength Heat-resistant Cu-Ni-based Alloy Prepared by Centrifugal Casting

离心铸造高强耐热铜镍合金的组织和性能研究