基本释义:

热压成形

网络释义

1)hot-embossing,热压成形

2)hot embossing,热压成形

3)postforming grade,后成形;热压成形

4)hot extrusion,热挤压成形

5)hot stamping,热冲压成形

6)autoclave shaping,热压罐成形

用法和例句

The Temperature Control System of Hot-embossing Machines for Fabrication of Polymer Microstructures;

聚合物微结构热压成形设备的温度控制系统

The principles of hot-embossing method, process parameters and process control were briefly introduced, and according to the process requirements, the basic functions of hot-embossing machine including temperature and press force control were determined.

简要介绍了聚合物微结构热压成形的基本原理以及工艺参数和成形过程,根据工艺要求,确定了热压成形设备所应具有的温度、压力控制等基本功能。

For the needs of a new type of biodegradable implantable drug delivery,temperature control device and temperature control system of the hot-embossing equipment were designed and manufactured.

针对一种新型可降解植入式药物载体的高效制备需要,进行聚合物多腔体微结构热压成形设备的温度控制装置和温度控制系统研制。

Temperature is one of the important parameters in hot embossing.

温度是塑料微流控芯片热压成形过程中的重要工艺参数。

In this dissertation, based on the analysis of the development of the fabrication technology for microfluidic chips, a temperature control system has been developed, which is based on thermoelectric module for fabricating plastic microchannel by hot embossing.

本文在分析塑料微流控芯片制作技术的基础上，针对目前热压成形技术制作塑料微通道的特点，采用半导体热电致冷堆作为加热／致冷器件，研制了用于塑料微通道热压成形的温度控制系统，并对该系统的性能进行了分析和实验验证。

Because of the differences between hot stamping and traditional cold stamping, the analysis of heat balance and temperature field is in urgency.

热冲压成形技术，是利用金属热塑性成形的原理，能够在成形的同时实现对板料的淬火热处理，提高材料的成形性能，大大扩展了高强度超高强度钢在汽车零件的应用范围。

The hot stamping of martensitic steel blank is a n.

与传统的冷冲压工艺技术相比，热冲压成形工艺采用淬火性能更好的硼钢板为加工对象，能够在成形的同时实现对板料的淬火热处理，既利用了金属板料在高温下塑性提高的特点，同时又实现了对板料组织的淬火强化，并最终获得尺寸精度及机械强度俱佳的钣金制件。

The Temperature Control System of Hot-embossing Machines for Fabrication of Polymer Microstructures;

聚合物微结构热压成形设备的温度控制系统

The Mechanism Design of RYJ-II Hot Embossing Machine for Polymer Micro-Fabrication;

RYJ-II型聚合物微结构热压成形设备研制

RESEARCH ON ISOTHERMAL COMPRESSION AND HOT EXTRUSION TECHNOLOGY SPRAY FORMED 60Si-40Al ALLOY

喷射成形60Si-40Al合金热压缩与热挤压工艺研究

Simulation of Stamping for Car-muffler Heat Insulation-cover;

轿车消声器隔热罩冲压成形模拟分析

Statistical Research on the Pressure Forging Formation of Large Turbine Runner Blade

大型转轮叶片热模压成形统计学研究

Dynamic calculation of pressure center during hydraulic turbine blade hot forging

转轮叶片热模压成形压力中心的动态计算

Hot Spinning Process of Titanium Alloy Collar Rim of Lunar Rover

月球车钛合金轮圈的热旋压成形工艺研究

Nut Shaping Analysis of Heat Opposite Direction Extrusion and Die Design

热反挤压六角螺母成形分析及模具设计

Optimized Die Design and Numerical Simulation for Hot Extrusion Process of the Valve;

气门热挤压成形过程模拟及其模具优化设计

Research and Realization of the Key Technology in the Simulation of Hot Extrusion;

热挤压成形仿真关键技术的研究与实现

Thermal-Mechanical Coupling Numerical Simulation of Reciprocating Extrusion Processes on AZ31 Mg Alloy;

AZ31镁合金往复挤压成形热力耦合模拟研究

Deformation Limit of Hydroforming of AZ31 Magnesium Alloy Tubes at Elevated Temperature;

AZ31镁合金管材热态内高压成形极限研究

Analysis on Thermodynamics and Dynamics of the Microstructure Solidfied under Centrifugal Pressure;

离心压力下凝固组织形成热力学与动力学分析

Thermo-Mechanical Coupled Simulation for 6063 Aluminium Alloy Tube Extrusion;

6063铝管挤压成形过程的热力耦合数值模拟

Research on Process and Equipment for Hot Extrusion of the Shell of Automobile Absorber;

汽车减振器外壳热挤压成形工艺及装置研究

Finite Element Simulation of Hot Extrusion for TA2 Tubing by Flat-cone Die

TA2管材平锥模热挤压成形过程的有限元模拟

Geometrical deformations of the framed-mould in autoclave processing for composite structures

热压罐成型工艺所用框架式模具的变形分析

Formability of warm hydroforming of AZ31B magnesium alloy tube

AZ31B镁合金管材热态内压成形性能的研究