基本释义:

清理焊烽

网络释义

1)weld dressing,清理焊烽

2)deseaming

[di:'si:mi?],焊缝清理

3)preweld cleaning,焊前清理

4)trimming,清理焊缝

5)welding-seam cleaner,焊缝清理机

6)cleaning of welded surfaces,焊件表面清理

用法和例句

The deseaming technique was successfully used in stainless steel rolling based on the study of strength and thickness of welding seam and parameters adjustment of pickling units.

通过对清理后的不锈钢焊缝强度及厚度的研究以及对焊缝清理设备和不锈钢热带酸洗机组运行参数的调整,在国内首次实现了对不锈钢焊缝的有效清理,在可逆式轧机轧制不锈钢时减少了带钢的未轧部分,提高了产品综合收得率,效益显著。

a linen tape used for trimming.

一个用来清理焊缝的亚麻布有色织带。

Structure Principle Analysis to Inside Burr Removing Unit for Longitudinal Welded Pipe

直缝焊管内毛刺清除装置结构原理分析

With fine ability to clear off oxidation film, The width of clearing film can be adjusted continuously to make out good-looking welding seam.

超强清理氧化膜能力，清理宽度连续可调，焊缝光亮美观。

Research on the Mechanism of Undercut Formation and High Speed Welding Technology

焊缝咬边形成机理及高速焊工艺研究

As for welding seams of the same heat treatment state, the hardness of welding seam area depends on different welding wires.

对于同一种热处理状态的焊缝,焊缝区的硬度取决于不同的焊丝。

The deviatio n between torch and seam is calculated after image processing.

图象处理后计算焊枪和焊缝之间的偏差。

Signal Testing and Processing in the Seam Tracking System of Arc-swing-typed Submerged Arc Welding;

摆动电弧埋弧焊焊缝跟踪信号检测与处理

Preliminary Analysis of Bead Defects Formation Mechanism in High-speed GMAW

高速GMAW焊接焊缝成形缺陷机理的初步分析

Sucking-extruding Theory for the Material Flow in Friction Stir Welds

搅拌摩擦焊焊缝金属塑性流动的抽吸—挤压理论

Welding the welds which are stagger first, then is the straight ang long weld.

先焊错开的端焊缝，后焊直通长焊缝。

WELDING TECHNOLOGY,WELDING MANAGEMENT AND THE QUALITY CONTROL OF THE STEEL BOX GIRDER OF HUANGPU BRIDGE OF PEARL RIVER IN GUANGZHOU

广州珠江黄埔大桥钢箱梁环缝焊接工艺、焊接管理及焊接质量控制

Application of digital image processing in the weld seam recognition

数字图像处理在焊缝识别中的应用

Study on DSP Processing System of Welding Seam Image;

基于DSP的焊缝图像处理系统研究

Research of Image Processing Technology in Welding Seam Tracking System;

焊缝跟踪系统中的图像处理技术研究

Application research on FPGA used in welded joint imagery processing

FPGA在焊缝图像处理中的应用研究

DC seam welder-"C"France Type.

直流缝焊机,"C"型。

Repairs were made by cleaning out the breaks and filling with gunite.

曾将裂缝中的碎块清理并往裂缝喷桨进行修理。

Investigation on Computer Vision Inspection of Laser Welding of Inlet Tube Based on Digital Image Processing Technology;

基于数字图像处理技术的接杆激光环焊焊缝视觉检测系统研究