基本释义:

熔敷金属试样

网络释义

1)deposited metal test assembly,熔敷金属试样

2)cladding,熔敷

3)deposited metal,熔敷金属

4)deposition rate,熔敷率

5)cold metal transfer surface cladding,表面熔敷

6)Cu cladding layer,铜熔敷层

用法和例句

A new coaxial feed laser cladding system without carrying gas is researched.

在二维平面上熔敷消除了方向性影响 ,多层激光熔敷组织、成分及硬度分布均匀。

The influence of irradiation manner of a YAG pulsed laser on the microstructure and cracking behavior of claddings was characterized.

采用Nd:YAG固体脉冲激光器,在镍基高温合金上激光熔敷镍基自熔合金,对激光多次辐照条件下熔敷层的开裂问题进行了探索性研究。

Influence of gas content on impact toughness of deposited metal of martensitic stainless steel;

气体含量对马氏体不锈钢熔敷金属冲击性能的影响

Effects of nonmetallic inclusions on acicular ferrite nucleation in deposited metals of microalloyed steel;

夹杂物对微合金钢熔敷金属针状铁素体形核的影响

Research of M-A component in 9%Cr-1%Mo deposited metal;

9%Cr-1%Mo耐热钢熔敷金属中M-A组元的研究

Accordingly the deposition rate is increased,and the weld formation is improved.

与常规钨极氩弧焊的对比分析表明,由于双钨极氩弧焊降低了电弧压力,提高了焊丝的熔敷率,因而在大电流高速度焊接时,极大地减少了凹坑、咬边等缺陷,实现了良好的焊缝成形,从而改善了常规钨极氩弧焊不适合大电流高速度焊接的不足,拓宽了钨极氩弧焊的使用范围,提高了焊接生产率。