基本释义:

渗碳

网络释义

1)carburizing

['kɑ:bjuraizi?],渗碳

2)carburization

[,kɑ:bjurai'zei??n],渗碳

3)Carbonization,渗碳

4)Carbonizing,渗碳

5)cementation,渗碳

6)carburising,渗碳

用法和例句

Defects and hardness index of carburizing process;

渗碳工艺缺陷与硬度指标

Effects of carburizing time on microstructure and transverse rupture strength of graded cemented carbides;

渗碳时间对梯度硬质合金显微组织和抗弯强度的影响

Carburizing Processes by Computer Aided Design;

计算机辅助设计气体渗碳工艺

Defective Carburization of Diesel Engine Components and its Countermeasure and its Countermeasure;

柴油机零件气体渗碳缺陷分析及对策

The study on carburization of molten iron of bf at dropping process;

高炉铁水滴落过程的渗碳研究

Improvement of 20CrNi2Mo Gear Carbonization Process;

20CrNi2Mo材料齿轮渗碳工艺改进

The carbonization have a important function in the mechanical industry.

渗碳工艺在机械行业中扮演着重要角色。

The two pure Fe samples whose surface layers are decarbonization are gotten with the furnace cooling by putting steel Q235 into resistance furnace and heating to 1253K for 40 min.

将其中试样A通过氧化-还原处理,表面具有层状结构,与另一脱碳试样B一起放入改造后的电阻炉内在通氢气的气氛中进行渗碳淬火。

To be detailed,the influences lf shot peening parameters after carbonizing on microstructure and properties lf carbonized layer were investigated.

本文研究了20CrMoH汽车齿轮用渗碳钢渗碳后喷丸对渗碳层组织和性能的影响。

Graphitic particle furnace which is a general furnace in usual c an be served as carbonizing by adding a litter catalyst, without any assistant d evices on carbonizing temperature.

平时作为加热炉使用的石墨流态粒子炉,在无需添加任何辅助装置、只需在石墨粒子中加入极少量的催化剂在渗碳温度下即可实现渗碳。

The carbonizing gear steel is one of the main structural steels for automotive purpose and the high strength gear steels,which the key automobile works are using in our Country are the foreign imported carburizing steels with various brands.

渗碳齿轮钢是汽车用主要结构钢之一,国内主要汽车生产厂家的高强度齿轮钢材料一直使用不同国家多个牌号的渗碳钢。

18CrMnNiMoA steel cementation crackle reasons analysis;

18CrMnNiMoA钢渗碳裂纹原因分析

Among them one can mention the initial and primary defects of the tube bend material, deterioration of its microstructure and the interaction between such factors as cementation, oxydation, and alternating thermal stre.

对某化工厂乙烯裂解炉管弯头开裂原因进行了综合分析 ,并对失效机理进行了探讨 ,指出造成弯头过早开裂的主要原因是炉管弯头材料的原始缺陷、显微组织劣化以及渗碳、氧化、热交变应力和气流冲刷相互作用的结果 ,并在此基础上 ,提出了一些预防措

In this paper, a systematic study on the black pottery, especially its cementation process, has been done with Cangzhou clay as main material.

以沧州粘土为制陶原料,对黑陶的渗碳过程进行了系统的研究。

Optimization method of pulsed plasma carburising process;

脉冲离子渗碳过程优化算法

At the end,it shows that the acetylene vacuum carburising is an environmentally-friendly case-hardening process to integrate into the production line.

本文论述乙炔真空渗碳AvaC的一些基础问题、有效性、过程及控制、高压气淬和这种工艺方法的实际应用。

liquid carbonitriding

液体碳氮共渗, 液体渗碳氮化法

Model for the distribution of carburized case depth of spur gear in warm forming after car burizing

直齿轮“渗碳-温挤”渗碳层厚度分布模型

continuous bright carburizing quenching furnace

连续式光辉渗碳淬火炉

case hardening grade alloy gear steel

渗碳(皮硬)级合金齿轮钢

Study on the hydrogen embrittlement phenomena of carbonitriding tape gear;

合金渗碳钢锥齿轮碳氮共渗的氢脆现象研究

INVESTIGATION OF THE ACCURATE CONTROL ABOUTSURFACE CARBON CONCENTRATION OF CARBURISING PART

渗碳零件表面碳浓度精确控制的探讨

Sim? ilarly, an increase in case depth, particularly uneven case depth in case hardening steels, increases warpage on quenching.

与此类似，渗碳层厚度越大，特别是对于渗碳层厚度不一的渗碳用钢，淬火时更易产生翘曲。

Study on the High Temperature Oxidation Resistance and Carbonization Resistance of Diffusion Aluminized Stainless Steel;

扩散渗铝不锈钢的抗高温氧化和抗渗碳性研究

Measurement on the carbonizing or nitro-caburizing harden case depth of sintering iron-based material

GB/T9095-1988烧结铁基材料渗碳或碳氮共渗硬化层深度的测定

Research Hydrogen-free Carbonizing and Hydrogen-free Carbonitriding on Titanium and Titanium Alloy Ti6A14V by Double Glow Plasma Discharge;

钛及钛合金Ti6A14V双层辉光离子无氢渗碳及无氢碳氮共渗的研究

Study on Optimizing the Tecnics of the Super Saturation Carburization on 20Cr Steel and a New Stype Super Saturation Carberization Steel;

20Cr钢超饱和渗碳工艺优化及一种新型超饱和渗碳钢的研究

The development of Numerical Simulation System of Carbon Concentration Distribution in Carburized Layer of the Usual Carburized Materials

常用合金渗碳材料碳分布数值模拟系统开发

Specification for carburizing steels of bearings

GB/T3203-1982渗碳轴承钢技术条件

The case-hardening or carburizing process is in wide use.

表面淬火或渗碳法应用十分广泛。

Simulation Study on Fluidized Bed Carburizing Layer Depth Mathematic Model

流态化渗碳层深度数学模型仿真研究

Study of Carbusintering Process of Fe-Ni Alloy Powder Materials;

Fe-Ni合金粉末材料渗碳烧结的研究

Gas Nitrocarburzing for 4Cr5MoSiV1 Steel

4Cr5MoSiV1(H13)钢的气体氮碳共渗

Surface Compound Treatment of C-N Multi-elements and RE-B-C-N Multi-elements Deep-penetrating

碳氮共渗-深层稀土硼碳氮共渗复合处理