基本释义:

外燃式热风炉

网络释义

1)external combustion hot stove,外燃式热风炉

2)external combustion,外燃式热风炉

3)M-P hot stove,马琴式外燃式热风炉

4)external-combustion swirl-flowing hot blast furnace,外燃旋流热风炉

5)Internal combustion hot stove,内燃式热风炉

6)top burning stove,顶燃式热风炉

用法和例句

The high temperature practice of the external combustion hot stoves on the new BF at PZH I&S Co.

新建的攀钢４号高炉外燃式热风炉，实现高风温的关键是研究合理的燃烧制度，选择最佳燃烧操作参数，改进燃烧操作，实现自动控制燃烧，研究认为，采用空燃比为０。

This paper analyses and summaries the advantages and disadvantages of three external combustion stoves of No.

文章通过鞍钢6高炉3座外燃式热风炉投产使用24年运行实践,和本次检修时的破损调查,总结分析了该热风炉的优缺点,提出了发展高温长寿热风炉的新课题。

The results show that the reasons of long service of M-P hot stove at high temperature are special stove design and lining structure,suitable refractory,right bricking manner,high building quality,and so on.

鞍钢6号高炉采用的是马琴式外燃式热风炉,该热风炉已安全高效运行了近30年(其间曾3次更换砖格子和陶瓷燃烧器),其热风温度最高达到1 310℃,目前风温仍维持在1 100℃以上。

It introduces improvement on internal combustion hot stove body which is no use but still intact.

介绍了将已停用但仍完好的内燃式热风炉炉体经过改造,增加上料、出料及必要的烧制设备等,利用高炉富余的煤气,改造成煤气烧。

The new top burning stove developed by Jigang was in detail introduced.

对济钢开发的新型顶燃式热风炉进行了详细介绍,该炉具有整体结构稳定,风温高,操作安全的特点,适合热风炉新建或改造。

The new top burning stove was applied in Jigang.

济钢开发的预燃室置于顶部的新型顶燃式热风炉,其燃烧产生的废气经多次导流并充分燃烧后,均匀进入以19孔高效格子砖为载体的蓄热体,支撑炉箅子的底部支柱具有均匀分配冷风的作用。

The Design and Analysis for Outside Steel Sheel of External Combustion Hot Stove

外燃式热风炉炉壳钢结构设计与分析

Numerical Analysis of Furnace Shell of a Certain External Combustion Hot Stove and Related Design Suggestions;

外燃式热风炉炉壳数值分析与设计建议

Utilization of External-burning Stove Equipped with Double Preheating System for 2 000 m~3 BF in Tianjin Iron and Steel Co., Ltd;

天钢2000m~3高炉外燃式热风炉配双预热系统的使用效果

FEATURES ANALYSIS OF INTERNAL-COMBUSTION HOT BLAST STOVE FOR 3200 m3 BLAST FURNACE

唐钢3200m~3高炉内燃式热风炉特点分析

Technology and Equipment Features of Kalujin Top Combustion Hot Air Stove on No.3 Blast Furnace in Honghe Iron & Steel Co.

红钢3号高炉Kalujin顶燃式热风炉技术装备特点

The Practice of New Style of Hoogoven Internal Combustion Stove Heating Up in BX STEEL

本钢新型霍戈文内燃式热风炉烘炉实践

Experimention and Numerical Simulation of the Combustion Chamber Used in Top-Firing Hot Blast Stove;

顶燃式热风炉用燃烧器的试验研究与数值模拟

THE PANZHIHUA STEEL IMPROVED TOP-COMBUSTION HOT BLAST STOVE BURNER MASONRY TECHNIQUE

攀钢改进型顶燃式热风炉燃烧器砌筑技术

Transfer Phenomenon Study of Xuan Steel Whirl Top Combustion Hot Blast Stove

宣钢旋流顶燃式热风炉传输现象的研究

CHARACTERISTICS OF KALUGIN TOP COMBUSTION HOT BLAST STOVE AND TECHNICAL ANALYSIS

卡鲁金顶燃式热风炉的装备特点与技术分析

Simulation and Application on Burner Reform of ZSD Hot-Blast Stove

ZSD顶燃式热风炉烧嘴改造的模拟研究与应用

Numerical Simulation and Experiment Studying of Flow, Heat Transfer and combustion in Regenerative Reheating Furnace;

蓄热式热风炉流动传热与燃烧性能的数值模拟与实验研究

The Study and Application of Ceramic Burner for Hot Blast Stove;

高炉热风炉陶瓷燃烧器的研究与应用

Combustion Control System of Hot Blast Stoves with CBR AI Strategy;

高炉热风炉燃烧CBR智能控制系统

pulsation-free combustion

(热风炉)无跳动燃烧， 稳定燃烧

Auto-control Scheme for the Combustion System of the Regenerative Reheating Furnace

蓄热式加热炉燃烧系统自动控制方案

Numerical Simulation Research on the Top Burner of KALUGIN Hot Blast Stove

卡鲁金热风炉顶燃烧器数值模拟研究

The heat source may be steam, heat conduction oil, electricity or coal (oil) hot air furnace.

热源可采用蒸汽、导热油、电或燃煤(油)热风炉配套。