rolling temperature region

精品项目网 2024-05-23 23:11:46

基本释义:

轧制温度区

网络释义

1)rolling temperature region,轧制温度区

2)rolling temperature,轧制温度

3)set-back,轧制区长度

4)hot rolled temperature parameters,热轧温度制度

5)rolling temperature control,控制轧制温度

6)controlled rolling temperature interval,控轧温度区间

用法和例句

A model of regulation optimization control for thin gauge strip high-speed rolling of cold tandem mill was established,which was taken the rolling temperature of each stand as the target,and assured coiling temperature and rolling load under restriction.

根据薄带高速冷连轧生产的工艺特点,以各机架轧制温度相对均匀为目标,同时以保证终卷温度在设定范围内和各机架轧制负荷不超限为约束条件,建立了一套冷连轧机高速轧制的轧制规程优化控制模型,使用后效果较好。

Using the mathematic model and the engineering log, the factors affecting the head thickness precision are analyzed and a conclusion that the rolling temperature is the main factor is got.

热轧带钢的厚度精度是产品质量的重要指标 ,文章结合数学模型和工程日志对生产中影响带钢头部厚度的原因进行了分析 ,得出轧制温度是影响厚度的主要原因。

Study is made of the effect of rolling temperature and single-pass deformation rate on Kovar/Cu/Kovar laminates .

分析研究了轧制温度和单道次变形率对Kovar/Cu/Kovar层状复合材料制备的影响。

Then the effect of controlled rolling temperature interval on the microstructure and mechanical properties of experimental steel was analyzed.

分析了控轧温度区间对含Nb微合金化试验钢显微组织和力学性能的影响。

Research about the Rolling Temperature Model and Its Influencing Parameters of Cold Tandem Mills;

冷连轧机轧制温度模型及其影响因素的研究

Prediction of Rolling Temperature of Medium and Heavy Plate Based on GRNN Neural Network

基于GRNN网络的中厚板轧制温度的预测

The results show that the bonding is good when the temperature, two passes deformation ratio of rolling are1250℃,50% respec tively.

结果表明:轧制温度为1250℃两道次的轧制变形率为50%,界面结合较好。

according to the temperature of the metal being rolled, rolling processes can be classified as hot rolling and cold rolling. and the rolled products can thus be specified as hot rolled or cold rolled products.

根据轧制轧材的温度,轧制可分为热轧和冷轧;因而轧制产品也可分为热轧产品和冷轧产品。

On the Model of Prediction Temperature and Rolling Force Model in Splitting Caliber for Continuous Rolling Steel Angles

角钢连轧温度预报与切分孔轧制力模型

Adaptation strategy of finishing temperature control for hot strip rolling

热连轧精轧温度控制的自适应策略研究

The Temperature Simulation of 72A High-Carbon Steel Wire during Rolling Process;

72A高碳钢轧制过程中的温度模拟研究

H_∞ robust control for coiling temperature in hot rolling processing

热轧带钢卷取温度的H_∞鲁棒控制

Effect of Roll Gap Geometry and Rolling Temperatures on the Evolution of Deformation Textures and Microstructure in Rolled Non-oriented Silicon Steel

轧制几何和温度因素对无取向硅钢轧制形变织构及组织的影响

Numerical simulation of effect of temperature gradient on rolling of magnesium alloy sheets

温度梯度对镁合金板材轧制影响的数值模拟

The Application of Fuzzy Control in Cold-rolling Pickling Line Temperature Control;

模糊控制在冷轧酸洗线温度控制中的应用

Application of Rules Self-Optimizing Fuzzy Controller to Rolling Temperature Control

规则自寻优模糊控制在轧钢温度控制中的应用

Study on Temperature Field and Thermal Profile of Work Roll in Sheet and Strip Rolling;

板带轧制过程工作辊温度场与热辊型研究

Numerical Simulation of The Slab Temperature Field Based on ANSYS;

基于ANSYS的中厚板轧制前板料温度场数值模拟

The Coiling Temperature Control System of 1780mm Hot Strip Line at Anyang Steel

安钢1780mm带钢热连轧卷取温度控制系统的分析

Math Model for Temperature prediction of Heavy Rail during Universal Tandem Rolling Process

重轨万能连续轧制过程温度预报的数学模型

2D Temperature model and control strategy for the Laminar cooling system of 1780mm Hot Strip Mill

1780热连轧层流冷却二维温度模型及控制策略

Improvement of Rolling Profile Shape of R0 Roughing Mill with Permanent Rigidity Rolling

恒刚度轧制改善R0粗轧机的轧制板形

下一篇:没有了
上一篇:cheek box,cheek flask
精彩图文
相关推荐
  1. switch circuit controller

    精品项目网为您提供转换开关控制器switch circuit controller是什么意思,switch circuit controller翻译,switch circuit controller例句,switch circuit controller用法等有关,switch circuit controller单词知识大全供您查询使用!...

    0 条评论 59 2024-05-20 09:51

  2. ultraviolent sensitive coating

    精品项目网为您提供紫外线感光涂层ultraviolent sensitive coating是什么意思,ultraviolent sensitive coating翻译,ultraviolent sensitive coating例句,ultraviolent sensitive coating用法等有关,ultraviolent sensitive coating单词知识大全供您查询使用!...

    0 条评论 59 2024-05-21 18:54

返回顶部小火箭