基本释义:

胀疤

网络释义

1)expansion scab,胀疤

2)scale formation,结疤

3)scab,结疤

4)scaling process,结疤

5)scaling,结疤

6)bleeding defect,冷疤

用法和例句

The scale formation is main factor to influence improvement of evaporation efficiency.

蒸发效率的高低直接影响氧化铝生产能耗及成本,结疤是影响蒸发效率提高的主要因素。

Research on the factors which affect the scab's forming in the process of high pressure digestion of pingguo bauxite;

平果铝高压溶出过程结疤形成影响因素探索

To introduce the distinguishing and formation cause of such scabs as point dispersion tiny,block without root,turnup skin with root,point type,sawtooth,period block on the surface of wire rod made in Angang high speed wire rod mill.

介绍安钢高速线材表面点状弥散型细小结疤、块状无根结疤、翘皮状有根结疤、点状结疤、锯齿状结疤、周期性块状结疤的鉴别和形成原因,提出稳定连铸坯拉速、降低钢水过热度、提高钢水质量及连铸操作水平,使铸坯的表面和内在质量全面提高,是解决高速线材表面结疤缺陷的关键所在。

The formation reason of scab defect in inner cavity of the cylinder block produced with cold box cores was analyzed.

分析了使用冷芯盒树脂砂芯生产缸体铸件内腔结疤的原因,指出使砂芯保持一定强度,防止砂芯提前受铁液淋烫是防止结疤缺陷产生的重要措施。

Influence of lime adding method on scaling process in Bayer preheating process of diasporic bauxite slurry;

石灰添加方式对一水硬铝石型铝土矿浆预热过程结疤的影响

Progress in the Research on Scaling in the Bayer Ore Slurry Pre-Heating Process;

拜尔法矿浆预热过程中结疤问题的研究进展

Depending on the chemical content and phase composition of the scale combing with the characteri stics of process chart,This article put forward fuel scaling as a efficient way to clean up the scale.

结疤问题是长期困扰氧化铝生产的一大难题,结疤的存在会导致管道堵塞,设备产能降低,能耗增加,从而导致生产成本升高。

Scaling is a difficulty problem that gradually obsessed alumina production.

结疤是指氧化铝生产流程中的湿法生产设备和管道表面上附着的固态物质,结疤问题是长期困扰氧化铝生产的一大难题。

To heal or become healed by the formation of scar tissue.

结疤愈合疤痕组织形成而使愈合或变得愈合

The doctor will put some stitches in that cut to prevent it from scarring over.

医生会把那个伤口缝几针以免结疤。

The cut on his finger will eventually scar over.

他指头上的伤口最后会愈合结疤。

the skin will cicatrice and it will heal soon.

皮肤将会结疤并且很快就会愈合。

The cut on his forehead scarred over.

他额上的刀伤已结疤痊愈了。

The cut on his leg is scarring well.

他大腿上的伤口结疤情形良好。

Less than 1 percent develop severe conditions such as infection or scarring.

只有少于1%的人出现感染或结疤等严重的情况。

Fromation Reason and Prevention of Scab Defect in Inner Cavity of Cylinder Block Cast with Cold Box Cores

缸体铸件内腔结疤形成原因与防止措施

Progress in the Research on Scaling in the Bayer Ore Slurry Pre-Heating Process

拜尔法矿浆预热过程中结疤问题的研究进展

Study on the Heat Engineering Process and Scarring Mechanics of the Piping Dissolving;

管道化溶出热工过程及结疤机理的研究

Talk about the Harmfulness and Solution for the Agglomerating in the Gas Slationary Gemerating Store;

固定床煤气发生炉结疤的危害与解决方案

Reasons for wall-scaling in compound fertilizer production and its countermeasures in our company

我厂复混肥生产中产生结疤的原因及解决措施

The reasons causing surface defects such as scab, rat tail, buckle and so on, and their prevention measures were described.

叙述结疤、鼠尾、沟槽等表面缺陷的产生原因及防止方法。

Avoiding this scar tissue means getting the body to rebuild the complex fibrous structure of the original.

要避免结疤产生就要使身体重新长出受伤前那种有错综结构的纤维状组织。

Avoiding the scar tissue means getting the body to rebuild the complex fibrous structure of the original.

要避免结疤产生就要使身体重新生长出受伤前那种有错综结构的纤维状组织。

A knob, knot, protuberance, or swelling.

节，结，瘤球状物、结、节疤或肿瘤

The tissue has been destroyed and a scar has formed

那些组织受到破坏,结了疤

The tissue have be destroy and a scar have forme

那些组织受到破坏, 结了疤