基本释义:

真空熔炼金属

网络释义

1)vacuum metal,真空熔炼金属

2)vacuum melting,真空熔炼

3)melting of metal,金属熔炼

4)non-vacuum melting,非真空熔炼

5)Vacuum melting furnace,真空熔炼炉

6)vacuum induction melting method,真空熔炼法

用法和例句

The Dissolution of Oxygen in Ti6Al4V Melt during Vacuum Melting;

Ti-6Al-4V合金真空熔炼过程中氧元素的溶解

A self-made vacuum melting and argon shield continuous unidirectional solidification equipment was used to produce copper tube with continuous columnar structure.

采用自行研制的真空熔炼、氩气保护连续定向凝固设备制备出具有连续柱状晶组织的铜管铸坯,分析了铜管铸坯生产中熔体温度、连铸速度、冷却水量,结晶器等对其的影响。

In the process of vacuum melting AZ31 magnesium alloy, Nb powder and Mg-Nd intermediate alloy were added, respectively.

研究真空条件下,在重熔AZ31镁合金的过程中添加Mg-Nd中间合金,分析真空熔炼合金中夹杂物的成分及Nd的吸收率,观察其微观组织,对析出相进行分析,与不含Nd的AZ31进行比较,并着重讨论了提高其力学性能的途径。

Thermodynamic analysis for non-vacuum melting of Cu-Cr-Zr alloy;

Cu-Cr-Zr系合金非真空熔炼过程的热力学分析

In this paper a series of RE2MgNi9 hydrogen storage alloys were synthesized by vacuum induction melting method.

用真空熔炼法制备了多种贮氢合金原样,分别经不同温度、时间热处理和保护气氛下球磨处理。

Vacuum Melting Process for 5A90 Alminum Lithium Alloy

5A90铝锂合金真空熔炼工艺研究

The vacuum melting and argon protecting continuous unidirectional solidification technology was introduced, which combines vacuum inductive melting with continuous unidirectional solidification.

阐述了真空熔炼、氢气保护下引法连续定向凝固工艺。

The Research on Continuous Casting of Single-crystal Metals Apparatus under Conditions of Vacuum Melting and Argon Shield and Preparation of Single-crystal Copper;

真空熔炼氩气保护单晶连铸设备的研制及单晶铜制备

VACUUM METALLURGY FACILITY(Ⅲ)-VACUUM ARC FURNANCE

真空冶金装置(三)一真空电弧熔炼

Arc Discharge in the Vacuum Induction Melting and its A voidance

真空感应熔炼中弧光放电及解决办法

VIM Refining Extra-Low Oxygen Steel using CaO Crucible

用氧化钙坩埚真空感应熔炼超低氧钢

Simulation of Temperature Field in Vacuum Non-consumed Melting and Evaluation of Melting Effect

真空非自耗电弧熔炼温度场模拟及熔炼效果评估

Application of Computer to Vacuum Arc Remelting(VAR) of Rare Metals

微机在稀有金属真空电弧熔炼中的应用

Thermoelectric calculation and technological analysis during melting in vacuum consumable electro-arc furnace

真空自耗电弧炉熔炼时的电热计算与技术分析

Influence of Oxygen Contamination from Crucible Material on Deep Deoxidation of Molten Steel during Vacuum Induction Melting;

真空感应熔炼过程炉衬供氧对钢液深脱氧影响

Numerical Simulation of Electromagnetic Stirring during Vacuum Arc Remelting

真空自耗电弧熔炼中电磁搅拌的数值模拟

Technological research on 32CrMnSi2Ni6MoV with low gas content by vacuum induction melting

真空感应熔炼低气体含量32CrMnSi2Ni6MoV的工艺研究

Influence of CEVM on Surface Quality of Titanium Ingot

真空自耗熔炼工艺对钛锭表面质量的影响

Study on Feeding Process in CEVM of Titanium and Titanium Alloy

钛及钛合金真空自耗熔炼补缩工艺研究

Study on Desulphurization Process in Vacuum Induction Melting GH4169 Alloy for Turbine Disk

涡轮盘用GH4169合金真空感应熔炼脱硫工艺研究

Deoxidizing Dynamics of Refining Extra-Low Oxygen Steel during VIM in CaO Crucible

用氧化钙坩埚真空感应熔炼超低氧钢的脱氧动力学

Influence of arc current on solidification microstructure of Ti-10V-2Fe-3Al under vacuum arc melting

真空自耗电弧熔炼电流对Ti-10V-2Fe-3Al铸锭凝固组织的影响

Smelting of high nitrogen martensitic stainless steels by vacuum induction furnace under near normal protective atmosphere

真空感应炉近常压气氛保护熔炼高氮马氏体不锈钢