基本释义:

有限变形,有限形变

网络释义

1)finite deformation,有限变形;有限形变

2)finite deformation,有限变形

3)finite strain,有限变形

4)finite displacement,有限变形

5)limited deformation,有限变形

6)limited deformation,finite deformation,有限形变

用法和例句

Calculating method of finite deformation exponential hardening of truss subjecting compress load;

杆件受压时有限变形幂次强化计算方案

Analysis of finite deformations of inflatable membrane tubes;

薄膜充气管的有限变形分析

Study on feasible of some strain definition under finite deformation condition;

几种应变定义在有限变形下的适用性研究

An analytical approach to one-dimensional finite strain non-linear consolidation by Lie group transformation;

李群变换求解一维非线性有限变形固结问题(英文)

Upper and lower bounds of effective bulk and shear moduli for a twophase elastic composite with imperfect interface are derived in the case of finite strains.

导出了有限变形下含非完美界面两相复合材料的上下界限。

Different types of theories for finite strain plasticity have been explained.

近15年来,非经典塑性理论突破了经典理论的先验限制,在下述六个方面有独特的发展:①由微小变形向有限变形发展,确立了有限塑性变形理论;②由宏观唯象理论向细观深度发展,确立了塑性细观

Reciprocal theorem for non-linear elasticity with finite displacements in rectargular cartesian coordinates is established and reciprocal theorems for bending of thin plates with large deflections are given by Fubaolian.

付宝连建立了直角坐标系,建立了有限变形非线性弹性力学的功的互等定理并给出了大挠度弯曲薄板的功的互等定理。

Reciprocal theorem for non-linear elasticity with finite displacements in rectargular cartesian coordinates is established in this paper and reciprocal theorems for bending of thin plates with large deflections are given.

建立了直角坐标系有限变形非线性弹性力学的倒易定理并给出了大挠度弯曲薄板的倒易定理。

The generalized variational inequalities principle of elastic and plastic problem with friction and finite displacement is derived by the use of semi-inverse method.

利用改进的半反推法 ,导出了库仑摩擦约束弹塑性有限变形率形式的广义变分原

This paper introduces a stress analysis means under limited deformation of rubber core.

介绍了利用光弹实验方法在橡胶等制品有限变形条件下应力分析方法，通过防喷器胶芯的光弹实验，得到了其可能引起破坏的原因，为设计改进提供了依据。

For the first time,the main mechanical characteristics of stored materials and the influence of geometric shape of silo funnel on material fluidization and peak pressure of side wall were researched using limited deformation theory to conduct computer simulation on stored materials in silo.

首次采用有限变形理论对筒仓中贮料的流态进行了计算机模拟 ,探讨了贮料主要力学特性和筒仓漏斗几何形状对贮料流态及侧壁峰值压力的影响 ,并由此提出了判断整体流动和非整体流动的简易方法 。

Finite element formulation for finite deformation problem based on complementary energy principle

基于余能原理的有限变形问题有限元列式

The Geometric Description of Finite-deformed Body with Parallel Locomotion and Rigid Rotation;

具有大范围刚体运动的有限变形体几何描述

Large Deformation Consolidation Stochastic Finite Element Analyse of Soft-clay Road Embankment

软土路基大变形固结随机有限元分析

Large Deformation Elastic-Plastic Analysis of Soil Stability by Finite Flement Method;

土体稳定性弹塑性大变形有限元分析

Prediction of Welding Deformation & Residual Stress by FEM;

用有限元法预测焊接变形和残余应力

Finite Element Simulation of CP-Ti during Equal Channel Angular Processing at Room Temperature;

工业纯钛室温ECAP变形有限元模拟研究

Primary Exploration of Finite Element Analysis of Large Deformation of Dynamic Compaction Improved Foundation;

强夯加固地基大变形有限元分析初探

Fem Analysis of Elasto-Plastic Large Deformation on Slope Stability;

边坡稳定性弹塑性大变形有限元分析

The Finite Element Simulation of F.C.C Poly-Crystalline Plastic Deformation;

面心立方多晶体塑性变形有限元模拟

FEM analysis of rotational structures;

旋转结构非轴对称变形的有限元分析

The Finite Element Analysis of Widened Embankment Deformation and Stability

加宽路堤变形及稳定性的有限元分析

Finite Element Simulation of the Thin-wall Hydraulic Cylinder's Clamping Deformation

薄壁液压缸筒夹紧变形的有限元模拟

FEM Analysis for Rolls System Bend Deformation of Eighteen-high Mill

十八辊轧机辊系弯曲变形有限元分析

A Study on Distortion of Diesel Cylinder by Using FEA

有限元分析柴油机气缸孔变形的研究

FE analysis of creep age forming for Aluminum alloy 2324

2324铝合金蠕变时效成形有限元分析

Finite Element Analysis of Deformation Properties at Junction between New and Old Roadbeds

新旧路基结合部变形特性有限元分析

Finite Element Analysis of Deflection Deformation of RC Beam Strengthened With CFRP

CFRP加固RC梁挠度变形的有限元分析

THE U-TRANSFORMATION-FINITE ELEMENT METHOD FOR RECTANGULAR THIN-PLATE BENDING PROBLEMS

矩形薄板弯曲问题的U变换-有限元法