基本释义:

正齿轮驱动阀

网络释义

1)spur-gear-operated valve,正齿轮驱动阀

2)driving gear,驱动齿轮

3)driving pinion,驱动齿轮

4)valve gear,阀动齿轮

5)driving gearbox,驱动齿轮箱

6)drive-axle gear,驱动桥齿轮

用法和例句

The cold forging process of the driving gear for automobiles was analyzed.

分析了汽车驱动齿轮的冷模锻工艺。

The starter clutch of CAMMIS is ratchet type one, the driving gear of which is designed to double module one.

康明斯起动机单向器为棘轮式单向器 ,其驱动齿轮被设计成双模数制齿轮。

This paper analyses the meshing in and out process of the starter driving pinion and some disputed problems.

剖析起动机驱动齿轮的啮合和退出过程;对有争议的“先啮合,后接通”还是“先接通,后啮合”问题予以详尽的分析;简述起动机的使用技术问题。

Analysis of the sealing system of driving gearbox for high speed train;

高速列车驱动齿轮箱密封系统分析

Through application researches of characteristic and production of 17CrNiMo6H gear steel this paper points out that 17CrNiMo6H has the advantages of better carbonization layer toughness,lower notch sensitivity and high temper stability,good cutting and carbonizing heat treatment ability of gear blanks,17CrNiMo6H can be used in producing heavy-duty drive-axle gears.

通过对17CrNiMo6H齿轮钢的材料特性和生产应用研究,指出17CrNiMo6H具有较好的渗层韧性、较低的缺口敏感性和较高的回火稳定性,齿坯的切削加工和渗碳热处理工艺性优越,可用于重型、大吨位驱动桥齿轮的生产。

OIL PUMP AND DISTRIBUTOR DRIVE GEAR INTEGRAL WITH CAMSHAFT

油泵及与凸轮轴集成的分电盘驱动齿轮

Determination of Design Schemes about Forging and Forgging Die of Water Pump Drive Gear

水泵驱动齿轮的锻造及锻模设计方案的确定

Worn teeth on ring gear or drive pinion gear.

环形齿轮或驱动小齿轮上齿磨损。

twin-geared press

双边齿轮驱动压力机

End play in drive pinion bearings.

驱动小齿轮轴承的端隙。

Excessive distance between pinion gear and flywheel/drive plate gear.

小齿轮和飞轮/驱动板齿轮之间距离过大。

Refer to Drive Pinion Bearing Pre-Load Adjustment.

参阅驱动小齿轮轴承预荷调整。

The ring gear (bolted to the differential case) rotates the case

环形齿轮（栓在差速箱上）驱动差速箱

a toothed metal band driven by two wheels.

由两个轮子驱动的带锯齿的钢带。

a small spiked wheel at the end of a spur.

在驱动物末端的穗状齿轮。

Design Method for Teeth Shape of Driving Wheel of Holistic Track

整体履带板用驱动轮齿形的设计方法

The belts have teeth, or slotted spaces to engage and drive teeth on gear wheels.

皮带上有齿，或者槽以啮合并且驱动传动齿轮上的齿。

Gear A, at the end of the drive shaft, and gear B, on the countershaft, are in constant mesh.

齿轮A位于驱动轴的末端，齿轮B在副传动轴上，它们恒定啮合。

The ring gear is attached to the differential case so that the ease rotates with the ring gear when the latter is driven by the drive pinion.

冠状齿轮与差速器壳相连,这样当冠状齿轮由传动齿轮驱动转动时,差速器壳也转动。

Hyperbolic gear oil is recommended to be used in the differential gears in driving axles.

汽车驱动桥的差速器齿轮应采用双曲线齿轮油来润滑。

gear wheel drive

齿轮传动齿轮传动装置

Transfer case noisy in all drive modes.

动力分导齿轮箱在所有驱动模式中发出噪音。

RUGGEDNESS. Durable and quiet drive with automotive ring gear.

强度：自动环形齿轮提供的持久、安静的驱动。